DALI DT-B AC Triac Dimmer
DALI AC Triac Dimmer
Model No.: DT-B
Features
- AC phase-cut mosfet DALI dimmer
- One DALI address
- One channel output
- Trailing edge dimmer
- Adjustable minimum brightness
- Compliant with DALI standard protocol 101, 102, 205 (IEC
62386) - Compatible with DALI products from other international
incorporation - DALI address can be automatically assigned by DALI master
- Over-heat protection and overload protection with automatic
recovery
Technical Parameters
| Input and Output | Input voltage | Output voltage | Output current | Output power |
|---|---|---|---|---|
| Input | 100-240VAC | 100-240VAC | Max 1.5A | 150-360W |
Compatible Load Types
| Load Type | Maximum Load |
|---|---|
| Dimmable LED lamps | 200W @ 220V, 100W @ 110V |
| Triac Dimmable LED drivers | 200W @ 220V, 100W @ 110V |
| Incandescent lighting | 400W @ 220V |
| HV Halogen lamps | 200W @ 110V |
Remarks: Due to variety of LED lamp designs,
the maximum number of LED lamps is further dependent on power
factor result when connected to the dimmer. The maximum permitted
number of drivers is 200W divided by driver nameplate power rating,
and make sure the surge current is no more than 2 times 65A.
Mechanical Structures and Installations
Caution:
Operation: DALI address assigned by DALI
masters. DALI address can also be assigned by DALI Master
controller automatically. Please refer to user manuals of
compatible DALI Masters for specific operations.
Safety & Warnings
Ensure proper installation and follow safety guidelines provided
in the user manual.
User Manual Ver 1.0.0
DALI AC Triac Dimmer
Model No.: DT-B
1DALI address / 1 Channel output / Trailing edge
Features
AC phase-cut mosfet DALI dimmer, one DALI address, one channel output. Trailing edge dimmer. The minimum brightness is adjustable. In accordance with DALI standard protocol 101, 102, 205 (IEC 62386) and in compliance
with DALI products from other international incorporation. DALI address can be automatically assigned by DALI master. To dim and switch single color dimmable LED lamps, traditional incandescent and halogen lights. Over-heat protection, Overload protection, recover automatically.
Technical Parameters
Input and Output Input voltage Output voltage Output current Output power
100-240VAC 100-240VAC Max 1.5A 150-360W
Environment Operation temperature Case temperature (Max.) IP rating
Ta: -30 OC ~ +55 OC Ta: +70 OC IP20
Package Size Gross weight
Warranty Warranty
Compatible Load Types
Load Type
Maximum Load
Dimmable LED lamps 200W @ 220V 100W @ 110V
Triac Dimmable LED drivers
200W @ 220V 100W @ 110V
Incandescent lighting, 400W @ 220V HV Halogen lamps 200W @ 110V
Remarks Due to variety of LED lamp designs, maximum number of LED lamps is further dependent on power factor result when connected to dimmer.
Maximum permitted number of drivers is 200W divided by driver nameplate power rating, and make sure the surge current is no more than 2 times 65A.
L75x W75 x H40mm 0.981kg
5 years
Mechanical Structures and Installations
Set button
Set button (on the side) LED indicator
One groups of DALI signal input DALI bus no need distinguish plus-minus polarity
Black Red
AC L output AC N output
AC N input AC L input
Brown Blue
Blue Brown
165.00 mm
52.00 mm
165.00 mm
26.00 mm
52.00 mm
User Manual Ver 1.0.0
1
Wiring Diagram
DALI Master
Black Red
Brown Blue
Blue Brown
AC 100-240V Dimmable LED light
Blue Brown
Black Red
Brown Blue
Dimmable LED light
Caution:
Please carefully ensure all wire connections and polarities are correct and secure before applying power, otherwise this controller will be damaged. Note: When calculating the maximum number of load lamps or drivers, the input power or input current parameters of a single lamp or driver must be used, the output power parameters can not be used. In addition, the maximum surge current of the dimmer is 65A, the sum of surge current of multiple dimmable LED drivers should not exceed 2 times. otherwise, the product will be overloaded and damaged.
Operation
Minimum brightness setting The minimum brightness of the device can be set or deleted by press the “SET” button on the dimmer. Recall minimum brightness: Short press “SET ” button on the dimmer, LED indicator ash one, the light output the minimum brightness. Setting minimum brightness: Adjust the brightness to a desired minimum level, then press and hold down the “SET ” button 2s until the LED indicator ash one, the current brightness is set as the minimum brightness. The light can only be dimmable between this minimum brightness and maximum brightness. Delete minimum brightness: Adjust the brightness to maximum level, then press and hold down the “SET ” button 2s until the LED indicator ash one, the minimum brightness setting is deleted.
DALI address assigned by DALI masters DALI address can also be assigned by DALI Master controller automatically. Please refer to user manuals of compatible DALI Masters for speci c operations.
Safety & Warnings
· DO NOT install with power applied to device. · DO NOT expose the device to moisture.
User Manual Ver 1.0.0
1
DALIAC :DT-B
1DALI/1/
ACDALIDALI DALI101102205(IEC62386)DALI DALIDALI LED
100-240VAC 100-240VAC Max 1.5A 150-360W
IP
Ta: -30 OC ~ +55 OC Ta: +70 OC IP20
LED
LED
200W @ 220V 100W @ 110V 200W @ 220V 100W @ 110V
400W @ 220V 200W @ 110V
LEDLED
200W 130A
75x 75 x 40mm(xx) 0.981kg 5
52.00 mm
() LED
DALI
Black Red
ACL ACN
ACN ACL
Brown Blue
Blue Brown
165.00 mm
52.00 mm
165.00 mm
26.00 mm
1.0.0
1
DALI
Black Red
Brown Blue
Blue Brown
AC 100 240V LED
Blue Brown
Black Red
Brown Blue
LED
:
65ALED2
“SET” : “SET”LEDLED : LED”SET”2LED : “SET”2LED DALI DALIDALIDALI
&
1.0.0
GuangzhouSkyacneCo.,Ltdwww.iskydance.cn 2
景晴光电- 灯光控制系统专业制造商 官网
