Mountup Mu3005 Triple Monitor Desk Mount For 13 To 32 Inches Monitors Instruction Manual

MU3005 Triple Monitor Desk Mount for 13 to 32 Inches Monitors

Product Information:

• The product is a monitor stand with clamp and grommet base
  installation options.
• The stand supports monitors with VESA plates of size 75x75mm
  and 100x100mm.
• The maximum weight capacity of the stand is 17.6lbs (8kg).
• The stand includes various hardware components such as clamp
  bracket, clip plate, knob bolt, bracket, bolt, washer, L plate,
  round plate, upper pole, head, arm, VESA plate, lower pole, screws,
  Allen keys, cable clips, cap nut, spacers, and safety screw.
• The product is suitable for desks with thickness ranging from
  10mm to 80mm.

Product Usage Instructions:

Step 1: Clamp Installation

1. For desks with thickness between 10mm and 51mm, secure the pole
   assembly with the preassembled screw (02A) and adjust the clamp
   height to fit the desk plate. Tighten the clamp to secure the stand
   to the desktop.
2. For desks with thickness between 51mm and 80mm, follow the same
   steps as above using the appropriate components (05A, 02B,
   05C).
3. Ensure that the screws are not excessively tightened to avoid
   damaging the monitor.

Step 2: Grommet Base Installation

1. Secure the pole assembly with the preassembled screws
   (02A).
2. For desks with thickness between 10mm and 40mm, use components
   (05A, 02B, 01C, 05B) and follow the instructions.
3. For desks with thickness between 10mm and 60mm, use components
   (05A, 02B, 01C, 05C) and follow the instructions.

Step 3: Attaching Monitors to the Stand

1. Assemble the upper pole (0022AA) and lower pole (0022BB)
   together.
2. Secure the L plate (0011BB) to the lower pole (0022BB) using
   the preassembled screws (06).
3. Assemble the round plate (0011CC) on the desk and secure it by
   tightening the knob bolt (b) with the preassembled screws. Attach
   the lower pole (02B) to the round plate.
4. Attach the arm (0035B) to the pole and fasten the bolt with a
   5mm Allen key. Attach cable clips (0077A and 007BB) to the
   stand.
5. Slide the monitor head (033AA) down and tighten the bolt to
   secure it. Repeat the same steps for attaching additional
   monitors.
6. For the third monitor, also secure it to the stand using the
   safety screw.

If you have any questions or need further assistance, please
contact Customer Service before returning the product.

INSTALLATION INSTRUCTION

Safety Caution

Hardware Included

Please read this instruction carefully before installation.

Clamp Bracket All are included in 01A

v1

If you do not understand these instructions or have doubts about the safety of the installation, assembly

or use of this product, please contact us.

WARNING: This product contains small items that could be a choking hazard if swallowed.
KEEP AWAY FROM CHILDREN UNDER 3 YEARS OLD. ADULT SUPERVISION IS REQUIRED.

01A x1

a Clip Plate b Knob Bolt c Bracket d Bolt e Washer f Washer

L Plate

Round Plate

Upper Pole

Head

Arm

Before Starting Assembly
When attaching brackets to the flat screen, be careful not to over tighten screws and be sure that screws do not bottom out in the mounting holes.
Before starting assembly, verify all parts are included and undamaged. For parts shortage or damage, please contact us.

02A x1

01B x1
VESA Plate

01C x1

Lower Pole
02B x1

03A x1

03B x1

2mm

3mm

5mm

Screw

Allen key Allen key Allen key M8*10mm Cable Clip Cable Clip

Max: 17.6LBS
(8KG)
Each Monitor

75x75mm 100x100mm

DA-3L

If you have any questions, please feel free to contact Customer Service via Amazon before returning.

Step 1A Clamp Installation

1A-1

1A-2

1A-3

For 10~51mm thickness desk plate

06

Secure the pole assembly with the preassembled screw
02A

0.39~2″ 10~51mm

05A

02B

02B

05C For 51~80mm thickness desk plate
06

Adjust the Clamp height to fit your desk plate. Secure stand to the desktop by tightening Clamp.
2~3.15″ 51~80mm

Too Short

Too Long

Correct

Correct

Do not tighten the screws excessively or your monitor might be damaged.
No!

1

Step 1B Grommet Base Installation

1B-1

1B-2

1B-3

02A

a

Secure the pole assembly with the preassembled screws
05A
02B 01C

02B

b

02B 01C
05B

0.39~1.57″ 10~40mm

a

0.39~2.36″

10~60mm

b

Monitor Kit

04 x3 05A x1 05B x1 05C x1

06 x2

Philips Screws

Philips Screws

Safety Screw

M4 x 12mm x12
M-A

M4 x 30mm x12
M-B

M5 x12mm x1
M-C1

Step 2 Attach the VESA plates to the monitors
(a) For Flat Back

(b) For Recessed / Curved Back

07A x2 07B x4

Cap Nut

Spacers

M6
x2
M-C2

L10mm x24 M-D
2

M4 x 12mm M-A

Assemble the upper pole 0022AA and the lower pole 0022BB together

01B

05B

Secure the L plate 0011BB to the lower pole 0022BB with the preassembled screws.

05C
Secure the clamp bracket to the L plate with the screws 06
3

Assemble the upper pole 0022AA and the lower pole 0022BB together.

Dis-assemble the clamp bracket. the marked parts a and b will be used in next step.

Assemble the round Position pole assembly on the desk then

plate 0011CC to the secure it by tightening the knob bolt

lower pole 02B after making knob bolt b through the

with the preassem- Long plate aa , desk hole, and the bottom

bled screws.

of pole assembly sequentially.

4

M4 x 30mm M-B
M-D
Note: use 1 piece or 2 pieces of spacers M-D
5

Step 3 Attach the monitors to the stand

3-1 Bolt Heads UP!

3-2
03A

03B
Assemble the arm 0035B and the pole toghther.

07B

Fasten the bolt with 5mm Allen key 05CC . Attach the cable clips 0077A and 007BB to the stand.

05C 07A

Slide the monitor head 033AA down and tighten the bolt to secure it

3-4

Step 3 Attach the monitors to the stand
3-3 Repeat the previous step to secure the third monitor to the stand via fastening the safety screw

Step 5 Switch screen horizontally and vertically
If needed, the monitor can be rotated ±90 degrees for switching screen between horizontally and vertically for turn the monitors directly

05C M-C1

Step 4 Tilting Adjustment -30°
+30°

Hang 2 monitors at the same time.
Manage tools and cables

3mm Allen key
05B

L
M-C2

Hang the monitors onto the monitor arm

then using the 3mm Allen key 0077B to turn

the screws L to adjust the monitors to the

same level if necessary.

05C

Loosen
05C 5mm Allen key

Rise the monitor

Loosen tilting bolts, pull monitor to your desired angle, then fasten tilting bolts with the

Lower the monitor 6 5mm Allen key.

7

Set the desired angle of the monitors

360° Rotation
This function works better for monitors with the center of gravity.
Note: To ensure stability, the tightness of the rotation axis is preset, so it need
take some effort to rotate the VESA Plate.
Suggestion: Please attach the monitor first, then hold the two sides of it with
both hands, and rotate vigorously. If that doesn’t work out, please do not hesitate to ask for our help via Amazon.
8
Product dimensions

38m1.m5″

±90

This cable clip also can take in the Allen keys

Desk
Desk 9

31.7″ 806mm
2.95″ 75mm
3.94″ 100mm

±30°

30″ 762mm
1.54″ 39mm

±90

±90

7.29″ 185 mm

6.18″ 157mm

±90

2.95″ 75mm
3.94″ 100mm
±90

±90°

0.39~3.15″ 10~80mm

10

11