STAND-V003T-W Triple Monitor Desk Mount
Product Information: Triple Monitor Desk Mount
The Triple Monitor Desk Mount is designed to support three
monitors with VESA patterns of 75x75mm or 100x100mm and weighing up
to 22lbs (10kg) per arm. The mount comes with a clamp and a grommet
base for installation on a desktop. The mount also features cable
management clips to keep cables organized.
Package Contents:
- A (x3) VESA Plate
- B (x1) VESA Bracket
- C (x1) Arm
- D (x1) Clamp
- E (x1) Bottom Pole
- F (x1) Top Pole
- G (x1) Pole Connector
- H (x2) Cable Clip
- I (x1) Grommet Base
- J (x2) VESA Cap
- K (x5) Rubber Pads
- L (x1) Grommet Plate
- S-A (x3) M6x16mm Screw
- S-B (x2) M3x8mm Screw
- S-C (x1) Thumbscrew
- M-A (x12) M4x12mm Screw
- M-B (x12) M4x16mm Screw
- M-C (x12) M5x12mm Screw
- M-D (x12) M5x16mm Screw
- M-E (x12) Spacer
- M-F (x12) M5 Washer
- T-A (x1) 3mm Allen Wrench
- T-B (x1) 4mm Allen Wrench
- T-C (x1) 6mm Allen Wrench
Tools Needed:
- Phillips Screwdriver
Warning:
This product contains small parts and is not suitable for
children under 3 years of age. Adult supervision is required.
Do not exceed the weight capacity of the mount, as it may result
in serious injury.
Get in Touch:
- Monday-Friday from 7:00am-7:00pm CST
- Email: [email protected]
- Phone: 309-278-5303
- Website: www.vivo-us.com
- Live chat with an agent available on website
Product Usage Instructions:
- Choose either clamp or grommet base installation option.
- Option A: Clamp Installation
- Remove adhesive backing from Rubber Pads (K) and place them on
the underside of Clamp (D). - Assemble Clamp (D) to Bottom Pole (E) using M3x16mm Screws
(S-A) and 4mm Allen Wrench (T-B). - Secure Clamp (D) to the desktop.
- For grommet hole mounting, remove the screw in the top of Hand
Bolt (D1) on Clamp (D). - Stick Rubber Pads (K) to the bottom of Grommet Base (I).
- Attach Grommet Plate (L) to Hand Bolt (D1) and run through
grommet hole into Grommet Base (I) and thread into Pole (E).
Arm (C) in place using 6mm Allen Wrench (T-C).
Pole (F) into Pole Connector (G). Tighten the set screws in Pole
Connector (G) using 3mm Allen Wrench (T-C).
Secure VESA Bracket (B) in place using 6mm Allen Wrench (T-C).
(M-A or M-B for flat back monitors, M-C or M-D for curved back
monitors) and M5 Washers (M-F). Use Spacers (M-E) if
necessary.
Arm (C).
M3x8mm Screws (S-A). Tighten with a Phillips screwdriver. Secure
top monitor to VESA Bracket (B) using Thumbscrew (S-C). Use 6mm
Allen Wrench (T-C) to adjust the tilt.
Cable Clips (H).
future adjustments.
Wrench (T-C). Adjust monitors as desired.
Triple Monitor Desk Mount
Instruction Manual
SKU: STAND-V003T/W
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v003t
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x3) VESA Plate
B (x1) VESA Bracket
C (x1) Arm
D (x1) Clamp
E (x1) Bottom Pole
F (x1) Top Pole
G (x1) Pole Connector
H (x2) Cable Clip
I (x1) Grommet Base
J (x2) VESA Cap
K (x5) Rubber Pads
L (x1) Grommet Plate
S-A (x3) M6x16mm Screw
S-B (x2) M3x8mm Screw
S-C (x1) Thumbscrew
M-A (x12) M4x12mm Screw
M-B (x12) M4x16mm Screw
M-C (x12) M5x12mm Screw
M-D (x12) M5x16mm Screw
M-E (x12) Spacer
M-F (x12) M5 Washer
T-A (x1) 3mm Allen Wrench
T-B (x1)
T-C (x1)
4mm Allen Wrench 6mm Allen Wrench
TOOLS NEEDED
Phillips Screwdriver
2
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
DO NOT EXCEED WEIGHT CAPACITY.
22lbs
Failure to do so may result in serious injury.
(10kg)
PER ARM
ASSEMBLY STEPS
STEP 1
OPTION A: Clamp Installation Remove adhesive backing from Rubber Pads (K) and place them on the underside of Clamp (D). Assemble Clamp (D) to Bottom Pole (E) using M3x16mm Screws (S-A) and 4mm Allen Wrench (T-B). Then secure Clamp (D) to the desktop.
S-A
K
E
T-B
D
OPTION B: Grommet Base Installation For grommet hole mounting, remove the screw in the top of Hand Bolt (D1) on Clamp (D). Stick Rubber Pads (K) to bottom of Grommet Base (I). Attach Grommet Plate (L) to Hand Bolt (D1) and run through grommet hole into Grommet Base (I) and thread into Pole (E).
D
I
K
D1
E L
10-75mm
3
STEP 2
Slide Cable Clip (H) and Arm (C) onto Bottom Pole (E). Secure Arm (C) in place using 6mm Allen Wrench (T-C). Screw Pole Connector (G) onto Bottom Pole (E), then screw Top Pole (F) into Pole Connector (G). Tighten the set screws in Pole Connector (G) using 3mm Allen Wrench (T-C).
HC E
F G E
T-C T-A
STEP 3
Slide Cable Clip (H) and VESA Bracket (B) onto Top Pole (F). Secure VESA Bracket (B) in place using 6mm Allen Wrench (T-C).
B H
F
T-C
4
STEP 4
OPTION A: Flat Back Monitor Assemble VESA Plates (A) to back of monitors using Screw (M-A or M-B) and M5 Washers (M-F).
M-F
M-A
A
M-B
OPTION B: Curved Back Monitor Assemble VESA Plates (A) to back of monitors using Screws (M-C or M-D) and M5 Washers (M-F). If screws are too long, Spacers (M-E) may be required.
M-F
M-C
A
M-D
M-E
STEP 5
Slide VESA Plates (A) with monitors onto VESA Bracket (B) or Arm (C).
A B
C 5
STEP 6
Secure bottom two monitors to Arm (C) using VESA Caps (J) and M3x8mm Screws (S-A). Tighten with a Phillips screwdriver. Secure top monitor to VESA Bracket (B) using Thumbscrew (S-C). Use 6mm Allen Wrench (T-C) to adjust the tilt.
S-A J
T-C
S-C B
C
STEP 7
Manage cables using the cable management clips in Arm (C) and Cable Clips (H). Store Allen Wrenches (T-A, T-B, T-C) in Cable Clip (H) for future adjustments.
H C
T-PA T-BR
TQ-C
6
STEP 8
Level bottom monitors by turning VESA Caps (J) using 6mm Allen Wrench (T-C). Adjust monitors as desired.
±180°
+45° -45°
+45° -45°
±180°
±180°
+45° -45°
TR-C
J
7
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 10/24/2022
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESPONSE TIME (within office hrs): 1HR 8M – 23% within < 15m – 38% within < 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Register a .US.COM domain today!
VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
Triple Monitor Desk Mount – VIVO - desk solutions, screen mounting, and more
