STAND-V013L Black Dual Monitor + Single Laptop Desk Mount
Product Information:
The Black Dual Monitor + Single Laptop Desk Mount (SKU:
STAND-V013L) is a sturdy and durable mount designed to hold two
monitors and a laptop on a single pole. The product is shipped with
all the necessary hardware and tools required for installation. It
comes with an upper clamp, lower clamp, VESA bracket, laptop tray,
pole, laptop arm, clips, grommet plate, screws, and washers. The
mount can be installed in two ways: clamp installation or existing
grommet base installation. The mount can hold monitors weighing up
to 15.4 lbs (7 kg) per arm.
Product Usage Instructions:
Before using the Black Dual Monitor + Single Laptop Desk Mount,
please read the instructions carefully and follow them step by
step.
Tools Required:
- Phillips screwdriver
- Drill
- Screwdriver
Weight Capacity:
Do not exceed the weight capacity of 15.4 lbs (7 kg) per arm.
Failure to do so may result in serious injury.
Assembly Steps:
Step 1: Clamp Installation
Option A: Install Upper Clamp (C) to Pole (G) using M6x16mm
Screws (S-B) and 4mm Allen Wrench (T-A). Apply Pads (N) to the
underside of Upper Clamp (C). Then attach Lower Clamp (D) to Upper
Clamp (C) using M6x10mm Screws (S-A) and 5mm Allen Wrench (T-B)
using either the top or bottom holes in Upper Clamp, based on
desktop thickness. Secure the clamp assembly to the desktop by
tightening to the hand bolts on Lower Clamp (D).
Option B: Remove Hand Bolt (D1) from Lower Clamp (D) using a
Phillips screwdriver. Apply Pads (N) to Grommet Plate (J). Place
the pole assembly over grommet hole in desk, and connect using
Support Plate (M) and previously removed Hand Bolt (D1) from
underneath desk. Secure by tightening Hand Bolt (D1).
Step 2: Mounting
Option A: Slide Pole Cable Clip (L) onto the Pole (G). Assemble
Laptop Arm (B), Monitor Arm (A), and VESA Bracket (E) on to Pole
(G) and secure using 5mm Allen Wrench (T-B).
Option B: Slide Pole Cable Clip (L) onto the Pole (G). Assemble
VESA Bracket (E), Monitor Arm (A) and Laptop Arm (A), and on to
Pole (G) and secure using 5mm Allen Wrench (T-B).
Step 3: Cable Management
Install Arm Cable Clips (K) to Monitor Arm (A) and Laptop Arm
(B).
Step 4: Monitor Installation
Install two mounting screws (M-A or M-B) with Washers (M-C) onto
top holes of each monitor, leaving a 3mm gap. Slide monitors onto
respective Mount Arm (A) and VESA Mount (E) and insert two mounting
screws (M-A or M-B) with Washers (M-C) into remaining holes and
tighten using a Phillips screwdriver.
Step 5: Laptop Installation
Place Laptop Arms (H) underneath each side of Laptop Tray (F),
aligning square holes in Laptop Arms (H) with the edge and long
slot on each side. Insert Clips (I) through top to secure Laptop
Arms (H), making sure all four locks on each Clip (I) are engaged
with square holes in Laptop Arms (H).
Black Dual Monitor + Single Laptop Desk Mount
Instruction Manual
SKU: STAND-V013L
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v013L
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER: · NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND. · USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x1) Monitor Arm
B (x1) Laptop Arm
C (x1) Upper Clamp
D (x1) Lower Clamp
E (x1) VESA Bracket
F (x1) Laptop Tray
G (x1) Pole
H (x2) Laptop Arm
I (x2) Clip
J (x1) Grommet
Plate
K (x6)
L (x1)
Arm Cable Clips Pole Cable Clip
M (x1) Support Plate
N (x5) Pads
S-A (x2) M6x10mm
Screw
S-B (x3) M6x16mm
Screw
S-C (x4) M4x8mm
Screw
M-A (x12) M4x12mm
Screw
M-B (x12) M5x12mm
Screw
M-C (x12) M5 Washer
T-A (x1) 4mm Allen
Wrench
T-B (x1) 5mm Allen
Wrench
T-C (x1) 6mm Allen
Wrench
NOTE: SOME HARDWARE MAY NOT BE USED
2
TOOLS NEEDED
Phillips
Drill
Screwdriver
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
15.4 lbs Per Arm
(7 kg)
ASSEMBLY STEPS
STEP 1
OPTION A: Clamp Installation Install Upper Clamp (C) to Pole (G) using M6x16mm Screws (S-B) and 4mm Allen Wrench (T-A). Apply Pads (N) to the underside of Upper Clamp (C) as shown below. Then attach Lower Clamp (D) to Upper Clamp (C) using M6x10mm Screws (S-A) and 5mm Allen Wrench (T-B) using either the top or bottom holes in Upper Clamp, based on desktop thickness. Secure the clamp assembly to the desktop by tightening to the hand bolts on Lower Clamp (D).
G
T-B S-A
T-A C
N S-B
D OR
T-B S-A D
OPTION B: Existing Grommet Base Installation The gromment installation will make use of one Hand Bolt (D1) from Lower Clamp (D). To remove, use a Phillips screwdriver to remove the small screw from the top of Hand Bolt (D1) and unscrew Hand Bolt (D1) from Lower Clamp (D). Apply Pads (N) to Grommet Plate (J). Place the pole assembly over grommet hole in desk, and connect using Support Plate (M) and previously removed Hand Bolt (D1) from underneath desk, as shown. Secure by
tightening Hand Bolt (D1).
J D
N
G
10-40mm
M D1
3
STEP 2 (Option A)
SIDE LAPTOP MOUNTING: Slide Pole Cable Clip (L) onto the Pole (G). Assemble Laptop Arm (B), Monitor Arm (A), and VESA Bracket (E) on to Pole (G) and secure using 5mm Allen Wrench (T-B).
D
E
A
L
B
G T-B
4
STEP 2 (Option B)
CENTER LAPTOP MOUNTING: Slide Pole Cable Clip (L) onto the Pole (G). Assemble VESA Bracket (E), Monitor Arm (A) and Laptop Arm (A), and on to Pole (G) and secure using 5mm Allen Wrench (T-B).
A L
B E
G T-B
STEP 3
Install Arm Cable Clips (K) to Monitor Arm (A) and Laptop Arm (B). A B
K
5
STEP 4
Install two mounting screws (M-A or M-B) with Washers (M-C) onto top holes of each monitor, leaving a 3mm gap. Slide monitors onto respective Mount Arm (A) and VESA Mount (E) and insert two mounting screws (M-A or M-B) with Washers (M-C) into remaining holes and tighten using a Phillips screwdriver.
M-A M-C M-B
M-A M-C M-B
STEP 5
Place Laptop Arms (H) underneath each side of Laptop Tray (F), aligning square holes in Laptop Arms (H) with the edge and long slot on each side. Insert Clips (I) through top to secure Laptop Arms (H), making sure all four locks on each Clip (I) are engaged with square holes in Laptop Arms (H).
F
I
H
Insert two M4x8mm Screws (S-C) into the top holes of Laptop Tray (F), leaving a 3mm gap. Slide Laptop Tray (F) onto Laptop Arm (B) VESA plate and tighten screws. Install final two M4x8mm Screws (S-C) into bottom VESA holes to secure.
F
B
S-C
S-C 6
STEP 6
Adjust tilt on Mount Arm (A) and Laptop Arm (B) using 6mm Allen Wrench (T-C). To level height of monitors, use 5mm Allen Wrench (T-B).
T-C
T-B
STEP 7
Route cables through Arm Cable Clips (K) and Pole Cable Clip (L). Store 5mm Allen Wrench (T-B) and 6mm Allen Wrench (T-C) in Pole Cable Clip (L) for future adjustments.
K L T-C T-B
7
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 08/10/2022 REV1.2
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESPONSE TIME (within office hrs): 1HR 8M – 23% within < 15m – 38% within < 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Register a .US.COM domain today!
VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
Black Dual Monitor + Single Laptop Desk Mount – VIVO - desk solutions, screen mounting, and more
