STAND-V001VA Single Monitor Desk Mount with VESA Adapter Bracket
Single Monitor Desk Mount with VESA Adapter Bracket
This product is a desk mount designed to hold a single monitor
and comes with a VESA adapter bracket. The mount includes a pole,
clamp, swivel arm, VESA plate, pole cap, grommet plate, soft pad,
support plate, bracket arms, L support holders, and plastic covers.
The product has a maximum weight capacity of 17.6lbs (8kg).
Product Usage Instructions
- Loosen the knob on the clamp.
Option A: Desk Clamp Installation
- Mount the clamp to the pole using M6x16mm screws and a 3mm
Allen wrench. - Secure the assembly to the desktop by tightening the knob on
the clamp.
Option B: Grommet Installation
- Remove the screw from the clamp and disassemble.
- Mount the grommet plate to the pole using M6x16mm screws and a
3mm Allen wrench. - Adhere the soft pad to the grommet plate.
- If the desk does not have an existing grommet hole, drill a 3/8
(10mm) diameter hole at the desired position through the mounting
surface. - Position the pole on the mounting surface and secure using the
knob and support plate.
- Mount the clamp to the pole using M6x16mm screws and a 3mm
- Slide the pole cable clip and swivel arm onto the pole. Tighten
the swivel arm at the desired height using a 6mm Allen wrench.
Insert the pole cap into the top of the pole. Attach arm cable
clips onto the swivel arm.
- Attach L support holders to bracket arms using appropriate M6
screws for monitor thickness and a Phillips screwdriver. Do not
tighten fully.
- Connect the VESA plate to the assembled arms using carriage
bolts, nuts, a wrench, and a Phillips screwdriver. The arms can be
assembled in one of four methods.
- With all L support holders facing up, place the monitor on the
lower two holders and fully tighten lower two screws with a
Phillips screwdriver. Turn top holders down and tighten top screws,
then tighten nuts for the upper arms. Install plastic covers into L
support holders.
Single Monitor Desk Mount with VESA Adapter Bracket
Instruction Manual
SKU: STAND-V001VA
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-v001va
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER: · NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND. · USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x1) Pole
B (x1) Clamp
C (x1) Swivel Arm
D (x1) VESA Plate
E (x1) Pole Cap
F (x1) Grommet Plate
G (x1) Soft Pad
H (x1) Support Plate
K (x4) Bracket Arm
L (x4) “L” Support
Holder
M (x4) Plastic Cover
I (x2) Arm Cable
Clip
J (x1) Pole Cable
Clip
S-A (x3) M6x16mm Screw
S-B (x4) M6x40mm Screw
S-C (x4) M6x60mm Screw
S-D (x4) M6x80mm Screw
S-E (x1) M6 Cap Nut
S-F (x8) Nut
S-G (x8) Carriage Bolt
T-A (x1) 3mm Allen
Wrench
T-B (x1) 5mm Allen
Wrench
T-C (x1) 6mm Allen
Wrench
T-D (x1) Wrench
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED Alternative mounting hardware (if Bracket Arms are not used)
M-A (x4) M4x12mm Thumbscrews
2
M-B (x4) M4x30mm
Screws
M-C (x4) Spacers
TOOLS NEEDED
Phillips Screwdriver
ASSEMBLY STEPS
STEP 1
Loosen knob on Clamp (B).
B
DO NOT EXCEED WEIGHT CAPACITY. 17.6lbs
Failure to do so may result in serious injury.
(8kg)
STEP 2 (Option A)
Desk Clamp Installation Mount Clamp (B) to Pole (A) using M6x16mm Screws (S-A) 3mm Allen Wrench (T-A). Secure assembly to desktop by tightening knob on Clamp (B).
B
B
T-A
S-A
A 3
STEP 2 (Option B)
Grommet Installation Using a phillips screwdriver, remove the screw from Clamp (B) and disassemble. Set Knob (B2) aside.
B
B2
Mount Grommet Plate (F) to Pole (A) using M6x16mm Screws (S-A) and 3mm Allen Wrench (T-A). Remove adhesive backing from Soft Pad (G) and adhere to Grommet Plate (F).
T-A
S-A
G
F
A
If desk does not have an existing grommet hole, drill a 3/8″ (10mm) diameter hole at the desired position through the mounting surface.
Position Pole (A) on the mounting surface and secure
using Knob (B2) and Support Plate (H).
A
H B2
4
STEP 3
Slide Pole Cable Clip (J) and Swivel Arm (C) onto Pole (A). Tighten Swivel Arm (C) at desired height using 6mm Allen Wrench (T-C). Insert Pole Cap (E) into top of Pole (A). Attach arm Cable Clips (I) onto Swivel Arm (C).
E C J
I
T-C A
STEP 4
Attach “L” Support Holders (L) to Bracket Arms (K) using appropriate M6 Screws (S-B, S-C, or S-D) for monitor thickness and a Phillips screwdriver. Do not tighten fully.
S-B/C/D L K
STEP 5
Connect VESA Plate (D) to assembled arms using Carriage Bolts (S-G), Nuts (S-F), Wrench (T-D) and a Phillips screwdriver. Arms can be assembled in one of four methods, which are shown below and on next page.
T-D S-F
S-G
D
#1
5
STEP 5 (Continued)
T-D
S-F
S-G
D
#2
T-D
S-F
S-G
D
#3
S-G 6
T-D S-F
D
#4
STEP 6
With all “L” Support Holders (L) facing up, place monitor on lower two holders and fully tighten lower two screws with a Phillips screwdriver. Turn top holders down and tighten top screws, then tighten nuts for the upper arms. Install Plastic Covers (M) into “L” Support Holders (L).
L
M
STEP 7
Slide monitor assembly onto Swivel Arm (C) and secure with M6 Security Screw (S-E). S-E
C
STEP 8
Route cables through Arm Cable Clips (I) and Pole Cable Clip (J). Use 5mm Allen Wrench (T-B) to adjust tilt and swivel on VESA plate head.
T-B
CAUTION: To avoid risk of monitors sliding off, DO NOT rotate monitors beyond +5° or -5°.
I J 7
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 01/16/2023 REV1.2
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
AVG. RESPONSE TIME (within office hrs): 1HR 8M – 23% within < 15m – 38% within < 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Register a .US.COM domain today!
VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
Single Monitor Desk Mount with VESA Adapter Bracket – VIVO - desk solutions, screen mounting, and more
