Trevot Td130013ot 1-light 18.5 In. Black Outdoor Wall Lantern Sconce Instruction Manual (+ PDF)

Before beginning assembly of product, make sure all parts are
present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to
assemble the product. Estimated Assembly Times: 25 minnutes Tools
Required for Assembly (not included): Flathead screwdriver ,
Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety
glasses. Helpful Tools (not included): Wire strippers, Step
ladder.

Customer Service: [email protected]

ASSEMBLY INSTRUCTIONS

Attach the mounting plate (DD) to the outlet box (not included)
with the long mounting screws (CC).

Hardware Used:
CC Long mounting screw x 2
DD Mounting plate x 1

Strip 3/4 in. of insulation from wire ends. Twist stripped ends
together with pliers (not included), black to black (power) and
white to white (neutral). Attach copper wire to ground wire.
Helpful hint: If necessary, attach copper ground wire to grounded
outlet box.

Hardware Used:
DD Mounting plate x 1
CC Long mounting screw x 2

Attach wire nuts (BB).Tape wire nuts (BB) and wires
together.

Hardware Used:
BB Wire nut x3

Align the 2 screws(AA) through the holes of the back plate, and
fix them with screw nuts

Hardware Used:
AA Long mounting screw x 2
DD Mounting plate x 1
AA

Install light bulb (not included). Use one E26 bulb.

CAUTION:

To avoid any waterproofing problems, please make sure the light
fixture fits the mounting surface perfectly installation and use
waterproof glue around the canopy for better sealing after
installation.

Product Usage Instructions:

Ensure that all the parts mentioned in the package contents and
hardware contents list are present before starting the
assembly.
Use the required tools and follow the assembly instructions
mentioned above to assemble the product.
After assembly, ensure that the light fixture fits the mounting
surface perfectly. Use waterproof glue around the canopy for better
sealing to avoid any waterproofing problems.
Install one E26 bulb (not included) in the light fixture.
Read and understand the safety information mentioned in the
instruction manual before operating or installing the product.

View Fullscreen

Outdoor Wall Sconce

Instruction Manual

HARDWARE CONTENTS(shown actual size)

ABA

BBB

CBC

DBD

Print in china

PACKAGE CONTENTS

PART A Fixture

DESCRIPTION

A
QUANTITY 1

Long monting x 2 screw

Wire nut x 3

Long monting x 2 screw

Mounting plate (Not actual size) x 1

SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING
· TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). · MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Times: 25 minnutes Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses. Helpful Tools (not included): Wire strippers, Step ladder.
Customer Service: [email protected]

ASSEMBLY INSTRUCTIONS

1. Attach the mounting plate (DD) to the

outlet box (not included) with the long

mounting screws (CC).

Hardware Used

CC Long mounting screw

x 2

DD Mounting plate

x 1

2. Strip 3/4 in. of insulation from wire ends. 2 Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box.

DD CC

ASSEMBLY INSTRUCTIONS

4. Align the 2 screws(AA) through the holes 4

of the back plate, and fix them with screw

DD A

nuts

Hardware Used

AA Long mounting screw

x 2

DD Mounting plate

x 1
AA

5. Install light bulb (not included). Use one 5 E26 bulb.

Print in china

3. Attach wire nuts (BB).Tape wire nuts (BB) 3 and wires together.
Hardware Used

BB Wire nut

CAUTION: To avoid any waterproofing problems, please make sure the light fixture fits the mounting surface perfectly installation and use waterproof glue around the canopy for better sealing after installation.