TD130008OT 1-Light 13 inch Black Motion Sensor Outdoor Wall Lantern Sconce
Outdoor Wall Sconce
This product is an outdoor wall sconce that can be used to
provide illumination in outdoor spaces. It comes with a mounting
plate, long mounting screws, wire nuts, and a hardware contents
list.
Hardware Contents
- ABA
- BBB
- CBC
- DBD
Package Contents
- Fixture (Part A) x 1
- Long mounting screws x 2
- Wire nuts x 3
- Mounting plate x 1 (not actual size)
Safety Information
Please read the entire instruction manual before attempting to
assemble, operate or install the product. Make sure all parts are
present before beginning assembly. If any part is missing or
damaged, do not attempt to assemble the product. Tools required for
assembly (not included) are a flathead screwdriver, Phillips
screwdriver, pliers, electrical tape, wire cutters, and safety
glasses. Helpful tools (not included) are wire strippers and a step
ladder.
Assembly Instructions
- Attach the mounting plate (DD) to the outlet box (not included)
with the long mounting screws (CC).
- Hardware used: CC Long mounting screw x 2 and DD Mounting plate
x 1.
together with pliers (not included), black to black (power) and
white to white (neutral). Attach copper wire to ground wire.
Helpful hint: If necessary, attach copper ground wire to grounded
outlet box.
- Hardware used: none.
together.
- Hardware used: BB Wire nut x 3.
fix them with screw nuts.
- Hardware used: AA Long mounting screw x 2, DD Mounting plate x
1, and AA screw nuts.
- Hardware used: none.
Caution
To avoid any waterproofing problems, please make sure the light
fixture fits the mounting surface perfectly installation and use
waterproof glue around the canopy for better sealing after
installation.
Customer Service
If you have any questions or concerns, please contact customer
service at [email protected].
Outdoor Wall Sconce
Instruction Manual
HARDWARE CONTENTS(shown actual size)
ABA
BBB
CBC
DBD
Print in china
PACKAGE CONTENTS
PART A Fixture
DESCRIPTION
A
QUANTITY 1
Long monting x 2 screw
Wire nut x 3
Long monting x 2 screw
Mounting plate (Not actual size) x 1
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
· TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). · MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Times: 25 minnutes Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses. Helpful Tools (not included): Wire strippers, Step ladder.
Customer Service: [email protected]
ASSEMBLY INSTRUCTIONS
1. Attach the mounting plate (DD) to the
1
outlet box (not included) with the long
mounting screws (CC).
Hardware Used
CC Long mounting screw
x 2
DD Mounting plate
x 1
2. Strip 3/4 in. of insulation from wire ends. 2 Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box.
DD CC
ASSEMBLY INSTRUCTIONS
4. Align the 2 screws(AA) through the holes 4
of the back plate, and fix them with screw
DD A
nuts
Hardware Used
AA Long mounting screw
x 2
DD Mounting plate
x 1
AA
5. Install light bulb (not included). Use one 5 E26 bulb.
Print in china
3. Attach wire nuts (BB).Tape wire nuts (BB) 3 and wires together.
Hardware Used
BB Wire nut
x3
BB
CAUTION: To avoid any waterproofing problems, please make sure the light fixture fits the mounting surface perfectly installation and use waterproof glue around the canopy for better sealing after installation.
Digital Services, Technology and Consulting | Reply
