TD130007OT Outdoor Wall Sconce
Product Information
The Outdoor Wall Sconce is a lighting fixture that is designed
to be mounted on an outdoor wall. The package contents include one
fixture (Part A), long mounting screws, wire nuts, and a mounting
plate. The fixture requires a single E26 bulb (not included) for
operation.
The assembly instructions include safety information, a caution
regarding waterproofing, and estimated assembly times. The required
tools for assembly include a flathead screwdriver, Phillips
screwdriver, pliers, electrical tape, wire cutters, and safety
glasses. Helpful tools include wire strippers and a step
ladder.
Product Usage Instructions
- Before beginning assembly, ensure that all parts are present
and undamaged by comparing them to the package contents list and
hardware contents list. - Attach the mounting plate (DD) to the outlet box (not included)
using the long mounting screws (CC). - Strip 3/4 inch of insulation from the wire ends and twist the
stripped ends together with pliers. Attach the copper wire to the
ground wire and connect black to black (power) and white to white
(neutral). If necessary, attach the copper ground wire to a
grounded outlet box. - Align the two screws (AA) through the holes of the back plate
and fix them with screw nuts. - Install a single E26 bulb (not included).
- Attach wire nuts (BB) and tape them together with wires.
- For waterproofing, ensure that the light fixture fits the
mounting surface perfectly. Use waterproof glue around the canopy
for better sealing after installation.
Please read and understand the entire instruction manual before
attempting to assemble, operate, or install the product. For any
missing or damaged parts, do not attempt to assemble the product.
If you need additional assistance, contact customer service at
[email protected].
Outdoor Wall Sconce
Instruction Manual
HARDWARE CONTENTS(shown actual size)
ABA
BBB
CBC
DBD
Print in china
PACKAGE CONTENTS
PART A Fixture
DESCRIPTION
A
QUANTITY 1
Long monting x 2 screw
Wire nut x 3
Long monting x 2 screw
Mounting plate (Not actual size) x 1
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
· TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). · MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Times: 25 minnutes Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses. Helpful Tools (not included): Wire strippers, Step ladder.
Customer Service: [email protected]
ASSEMBLY INSTRUCTIONS
1. Attach the mounting plate (DD) to the
1
outlet box (not included) with the long
mounting screws (CC).
Hardware Used
CC Long mounting screw
x 2
DD Mounting plate
x 1
2. Strip 3/4 in. of insulation from wire ends. 2 Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box.
DD CC
ASSEMBLY INSTRUCTIONS
4. Align the 2 screws(AA) through the holes 4
of the back plate, and fix them with screw
DD
nuts
Hardware Used
A
AA Long mounting screw
x 2
DD Mounting plate
x 1
AA
5. Install light bulb (not included). Use one 5 E26 bulb.
Print in china
3. Attach wire nuts (BB).Tape wire nuts (BB) 3 and wires together.
Hardware Used
BB Wire nut
x3
BB
CAUTION: To avoid any waterproofing problems, please make sure the light fixture fits the mounting surface perfectly installation and use waterproof glue around the canopy for better sealing after installation.
Digital Services, Technology and Consulting | Reply
