• Twist stripped ends together with pliers (not included), black
  to black (power) and white to white (neutral). Attach copper wire
  to ground wire.
• Helpful hint: If necessary, attach copper ground wire to
  grounded outlet box.

• Hardware Used
• BB Wire nut x3

• Hardware Used
• DD A
• AA Long mounting screw x 2
• DD Mounting plate x 1

• A
• B
• C

CAUTION: To avoid any waterproofing problems, please make sure
the light fixture fits the mounting surface perfectly installation
and use waterproof glue around the canopy for better sealing after
installation.

Product Usage Instructions

1. Select a location on an exterior wall that is suitable for
   mounting the Outdoor Wall Sconce.
2. Ensure that all parts are present and compare them with the
   package contents list and hardware contents list.
3. If any part is missing or damaged, do not attempt to assemble
   the product.
4. Tools required for assembly include a flathead screwdriver,
   Phillips screwdriver, pliers, electrical tape, wire cutters, and
   safety glasses. Wire strippers and a step ladder may also be
   helpful.
5. Attach the mounting plate (DD) to the outlet box (not included)
   using the long mounting screws (CC).
6. Strip 3/4 inch of insulation from wire ends and twist stripped
   ends together with pliers, black to black (power) and white to
   white (neutral). Attach copper wire to ground wire. If necessary,
   attach copper ground wire to grounded outlet box.
7. Attach wire nuts (BB) and tape wire nuts (BB) and wires
   together.
8. Align the two screws (AA) through the holes of the back plate
   and fix them with screw nuts.
9. Unscrew socket ring (C) from the socket and install the shade
   (B). Fix the shade with socket ring (C).
10. Install one E26 bulb (not included).
11. To avoid any waterproofing problems, ensure that the light
    fixture fits the mounting surface perfectly and use waterproof glue
    around the canopy for better sealing after installation.

Outdoor Wall Sconce

Instruction Manual

HARDWARE CONTENTS(shown actual size)

ABA

BBB

CBC

DBD

Print in china

PACKAGE CONTENTS

PART A Fixture B Shade C Socket ring

DESCRIPTION

A
B
C
QUANTITY 1 1 1

Long monting x 2 screw

Wire nut x 3

Long monting x 2 screw

Mounting plate (Not actual size) x 1

SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING
· TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). · MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Times: 25 minnutes Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses. Helpful Tools (not included): Wire strippers, Step ladder.
Customer Service: [email protected]

ASSEMBLY INSTRUCTIONS

1. Attach the mounting plate (DD) to the

1

outlet box (not included) with the long

mounting screws (CC).

Hardware Used

CC Long mounting screw

x 2

DD Mounting plate

x 1

2. Strip 3/4 in. of insulation from wire ends. 2 Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box.

DD CC

ASSEMBLY INSTRUCTIONS

4. Align the 2 screws(AA) through the holes 4 of the back plate, and fix them with screw nuts
Hardware Used

DD A

AA Long mounting screw

x 2

DD Mounting plate

x 1
AA

5. Unscrew socket ring (C) from the socket, 5

install the shade (B) and fix it with socket

ring (C).

A

Install light bulb (not included). Use one B
E26 bulb.

C

Print in china

3. Attach wire nuts (BB).Tape wire nuts (BB) 3 and wires together.
Hardware Used

BB Wire nut

x3

BB

CAUTION: To avoid any waterproofing problems, please make sure the light fixture fits the mounting surface perfectly installation and use waterproof glue around the canopy for better sealing after installation.

References

• Digital Services, Technology and Consulting | Reply