TD40020OT 2 Light 20.5 Inch Modern Black Outdoor Wall Sconce Lantern
Product Information: Outdoor Wall Sconce
The Outdoor Wall Sconce comes with all the necessary hardware to
assemble and install the product. The package includes a fixture
(Part A), four glass parts (Part B), short mounting screws (Part
AA), long mounting screws (Part CC), mounting plate (Part DD), and
wire nuts (Part BB). The product is manufactured in China.
Safety Information
Before attempting to assemble, operate or install the product,
please read and understand the entire manual. Do not attempt to
assemble the product if any part is missing or damaged. The
estimated assembly time is 25 minutes. Tools required for assembly
include a flathead screwdriver, Phillips screwdriver, pliers,
electrical tape, wire cutters, and safety glasses. Helpful tools
include wire strippers and a step ladder.
Product Usage Instructions
- Attach bulbs, glass and decorative part into the fixture body
as shown in the figure on the right.
- Hardware Used: Part A Fixture x1, Part B Glass x4
included) with the long mounting screws (Part CC).
- Hardware Used: Part CC Long mounting screw x2, Part DD Mounting
plate x1
ends together with pliers (not included), black to black (power)
and white to white (neutral). Attach copper wire to ground wire.
Helpful hint: If necessary, attach copper ground wire to grounded
outlet box.
wires together.
- Hardware Used: Part BB Wire nut x3
secure with short mounting screws (Part AA).
- Hardware Used: Part AA Short mounting screw x4, Part DD
Mounting plate x1
fixture fits the mounting surface perfectly during installation.
Use waterproof glue around the canopy for better sealing after
installation.
If you have any questions or concerns about the product, please
contact customer service at [email protected].
Instruction Manual
Outdoor Wall Sconce
HARDWARE CONTENTS(shown actual size)
ABA
BBB
CBC
DBD
Print in china
PACKAGE CONTENTS
A
B
PART A Fixture B Glass
DESCRIPTION
QUANTITY 1 4
Short monting x 4 screw
Wire nut x 3
Long monting x 2 screw
Mounting plate (Not actual size) x 1
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
· TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). · MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Times: 25 minnutes Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses. Helpful Tools (not included): Wire strippers, Step ladder.
Customer Service: [email protected]
ASSEMBLY INSTRUCTIONS
1. As shown in the figure on the right,
1
attach bulbs, glass and decorative part
into the fixture body.
Hardware Used
A Fixture
x1
B Glass
x4
2. Attach the mounting plate (DD) to the
2
outlet box (not included) with the long
mounting screws (CC).
Hardware Used
CC Long mounting screw
x2
DD Mounting plate
x 1
3. Strip 3/4 in. of insulation from wire ends. 3 Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box.
A B
DD CC
ASSEMBLY INSTRUCTIONS
4. Attach wire nuts (BB).Tape wire nuts (BB) 4 and wires together.
Hardware Used
BB Wire nut
x3
BB
5. Place fixeture (A) onto the mounting plate 5 (DD). Secure with short mounting screws (AA).
Hardware Used
AA Short mounting screw
x 4
DD Mounting plate
x 1
DD AA
CAUTION: To avoid any waterproofing problems, please make sure the light fixture fits the mounting surface perfectly installation and use waterproof glue around the canopy for better sealing after installation.
Print in china
Digital Services, Technology and Consulting | Reply
