TD60007OT Outdoor Wall Lantern Sconce
Product Information:
The product is an Outdoor Wall Sconce that is manufactured in
China. The product comes with an instruction manual that guides the
user through installation, troubleshooting, and maintenance of the
product. The product has a mounting plate, which is attached to the
ceiling box with two mounting screws. The fixture wires are tucked
into the ceiling box, and the back plate is aligned with the
mounting plate and fixed with screw nuts. The product requires some
tools for installation and assembly, including Phillips
screwdriver, safety goggles, flathead screwdriver, tape, wire
cutters, and wire strippers.
Product Usage Instructions:
Troubleshooting:
If the light does not turn on or if the fuse blows or circuit
breaker trips when the light is turned on, it could be due to power
being off, a faulty switch, or faulty wire connection. For crossed
wires or grounding power wire, check wire connections.
Product Maintenance:
To clean the outside of the fixture, use a dry or slightly
dampened clean cloth (use clean water, never a solvent) to wipe the
surface of the fixture. To clean the inside of the fixture,
disconnect power to the fixture by turning off the circuit breaker
or removing the fuse at the fuse box. Then use a dry or slightly
dampened clean cloth (use clean water, never a solvent) to wipe the
interior surface of the fixture. Do not use any cleaners with
chemicals, solvents or harsh abrasives. Use only a dry soft cloth
to dust or wipe carefully.
Installation:
DANGER: Before installation, turn off the main power at
the circuit breaker. WARNING: Installation must be
performed by a qualified licensed electrician.
Removing the existing fixture: Remove the existing fixture.
Connecting the wires: Connect the white supply wire to the white
fixture wire, connect the black supply wire to the black fixture
wire, and connect the ground supply wire to the ground fixture
wire. Use wire nuts to secure all connections.
Installing the fixtures: Tuck the fixture wires into the ceiling
box, attach the mounting plate to the ceiling box, and fix them
with two mounting screws. Align the two screws through the holes of
the back plate and fix them with screw nuts. To avoid any
waterproofing problems, make sure the light fixture fits the
mounting surface perfectly installation and use waterproof glue
around the canopy for better sealing after installation.
If you need any further assistance, please contact customer
service at [email protected].
Instruction Manual
Print in china
Outdoor Wall Sconce
TROUBLESHOOTING:
Light will not turn on.
Fuse blows or circuit breaker trips when light is turned on.
Possible Cause
1.Power is off. 2.Faulty switch. 3. Faulty wire connection.
1. Crossed wires or power wire is grounding out.
Corrective Action
1.Make sure power supply is on. 2.Test or replace switch. 3. Check wiring.
1. Check wire connections.
PRODUCT MAINTENANCE:
1.To clean the outside of the fixture,use a dry or slightly dampened clean cloth (use clean water ,never a solvent) to wipe the surface of the fixture.
2.To clean the inside of the fixture, first disconnect power to the fixture by turn off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of the fixture.
3.Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
CAUTION: To avoid any waterproofing problems, please make sure the light fixture fits the mounting surface perfectly installation and use waterproof glue around the canopy for better sealing after installation.
Customer Service: [email protected]
Installation
DANGER:Before installation,ture off the main
power at the circuit breaker.
WARNING:Installation must be performed by a
qualified licensed electricion
TOOLS REQUIRED FOR INSTALLATION AND ASSEMBLY (not included):
Phillips screwdriver
Safety goggles
Flathead screwdriver
tape
Electrical
Wire cutters
Wire strippers
1.Removing the existing fixture
A.Remove the existing fixture.
2.Connecting the wires
A.Connect the white supply wire to the white fixture wire. B.Connect the black supply wire to the black fixture wire. C.Connect the ground supply wire to the ground fixture wire. D.Use wire nuts to secure all connections.
Mounting screw
Mounting plate
3.Installing the fixtures
A.Tuck the fixture wires into the ceiling box,attached the mounting plate(C) to the ceiling box and fix them with 2 mounting screws(A).
B. Align the 2 screws(B) through the holes of the back plate(D), and fix them with screw nuts(E).
D AB
C
E
Mounting plate
Mounting screw
Print in china
Digital Services, Technology and Consulting | Reply
