Before beginning assembly of product, make sure all parts are
present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to
assemble the product. Estimated Assembly Times: 25 minutes Tools
Required for Assembly (not included): Flathead screwdriver,
Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety
glasses. Helpful Tools (not included): Wire strippers, Step
ladder.

Customer Service: [email protected]

Assembly Instructions

Attach the mounting plate (DD) to the outlet box (not included)
with the long mounting screws (CC).
Hardware Used:
CC Long mounting screw x 2
DD Mounting plate x 1
Strip 3/4 in. of insulation from wire ends. Twist stripped ends
together with pliers (not included), black to black (power) and
white to white (neutral). Attach copper wire to ground wire.
Helpful hint: If necessary, attach copper ground wire to grounded
outlet box.
Hardware Used:
BB Wire nut x3
BB DD CC
Attach wire nuts (BB).Tape wire nuts (BB) 3 and wires
together.
Hardware Used:
BB Wire nut x3
BB DD CC
Screw out the screws in the cover, take out the pearl cotton on
the lampshade, then screw the screws back.
Align the 2 screws(AA) through the holes of the back plate, and
fix them with screw nuts.
Hardware Used:
AA Long mounting screw x 2
DD Mounting plate x 1
AA
Install light bulb (not included). Use one E26 bulb.

Printed in China

Product Usage Instructions

Attach the mounting plate to the outlet box using the long
mounting screws provided.
Strip 3/4 inch of insulation from wire ends. Twist stripped
ends together with pliers, black to black (power) and white to
white (neutral). Attach copper wire to ground wire. If necessary,
attach copper ground wire to grounded outlet box. Use wire nuts
provided and tape them together.
Screw out the screws in the cover, take out the pearl cotton on
the lampshade, then screw the screws back.
Align the 2 screws through the holes of the back plate, and fix
them with screw nuts.
Install a light bulb (not included) using one E26 bulb.

View Fullscreen

Outdoor Wall Sconce

Instruction Manual

HARDWARE CONTENTS(shown actual size)

ABA

BBB

CBC

DBD

Print in china

PACKAGE CONTENTS

PART A Fixture

DESCRIPTION

A
QUANTITY 1

Long monting x 2 screw

Wire nut x 3

Long monting x 2 screw

Mounting plate (Not actual size) x 1

SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING
· TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). · MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Times: 25 minnutes Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses. Helpful Tools (not included): Wire strippers, Step ladder.
Customer Service: [email protected]

ASSEMBLY INSTRUCTIONS

1. Attach the mounting plate (DD) to the

outlet box (not included) with the long

mounting screws (CC).

Hardware Used

CC Long mounting screw

x 2

DD Mounting plate

x 1

2. Strip 3/4 in. of insulation from wire ends. 2 Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box.

3. Attach wire nuts (BB).Tape wire nuts (BB) 3 and wires together.
Hardware Used

BB Wire nut

DD CC

ASSEMBLY INSTRUCTIONS
4. Screw out the screws in the cover, take out 4 the pearl cotton on the lampshade, then screw the screws back.

5. Align the 2 screws(AA) through the holes 5

of the back plate, and fix them with screw

DD A

nuts

Hardware Used

AA Long mounting screw

x 2

DD Mounting plate