Wingbo Wbwl-s014-nw Indoor Lantern Wall Sconces Installation Guide

WBWL-S014-NW Indoor Lantern Wall Sconces

Product Information

The product is a wall lamp that comes with all the necessary
parts for installation. It includes a cage (A), a backplate (D), a
washer (G), a nut (H), a wrench (I), screws (E), decor nuts (C), an
anchor (L), a universal plate (F), and a bulk (K). The lamp can be
installed using either a plug-in or hardwired method.

Product Usage Instructions

Plug-in Installation

1. Ensure you have all the contents mentioned in the manual.
2. Push B into A to form the cage.
3. Attach the backplate (D) to the cage (A&B) by placing the
   washer (G) first and then screwing the nut (H) using the wrench
   (I).
4. Mark the position for mounting the universal plate (F) and
   insert the screws (E) into the plate before mounting.
5. Insert the anchor (L) into the wall and mount the wall lamp to
   secure it in place with the screw (M).
6. Wire the black and white wires from the cage input wire to the
   plug’s black and white wire, ensuring black is connected to black
   and white is connected to white.
7. Put the bulk (K) into the socket.
8. Plug the lamp into a socket and turn the light on/off. If it
   does not light up, unplug it and check the wiring from step 3 or
   the bulb. Then, try turning it on/off again.

Hardwired Installation

1. Ensure you have all the contents mentioned in the manual.
2. Push B into A to form the cage.
3. Attach the cover (D) to the cage (A&B).
4. Loosen and remove the cable from the cover for hardwired
   installation.
5. Mount the universal plate (F) to the junction box and secure it
   with screws (E).
6. Mount the wall lamp to the universal plate and secure it with
   the decor nuts (C) onto the screws.
7. Turn on the light through the switch on the wall. If it does
   not light up, please check the wiring.
8. Wire the black and white wires from the cage input wire to the
   supply black and white wire, ensuring black is connected to black
   and white is connected to white.
9. Put the bulk (K) into the socket.

8BMM-BNQ*OTUBMMBUJPO.BOBVBM

8″3/*/(

c5PSFEVDFUIFSJTLPGGJSF
FMFDUSJDBMTIPDLPSQFSTPOBMJOKVSZ
BMXBZTUVSOPGGMJHIUGJYUVSF

BOEBMMPXJUUPDPPMQSJPSUPSFQMBDJOHUIFMJHIUCVMC

c%POPUUPVDICVMCXIFOGJYUVSFJTUVSOFEPOEPOPUMPPLEJSFDUMZBUBMJUCVMC

c,FFQGMBNNBCMFNBUFSJBMTBXBZGSPNMJUCVMC

c5IJTGJYUVSFIBTCFFOSBUFEGPSVQUPPOF
&4PDLFU8BUUNBYJNVNTUBOEBSE

JODBOEFTDFOUMJHIUCVMCT OPUJODMVEFE
PS$’-PS8-&%FRVJWBMFOUCVMCT JODMVEFE

5PBWPJEUIFSJTLPGGJSF%0/05&9$&&%5)&3&$0..&/%&%-“.18″55″(&

c5IFMJHIUJOHGJYUVSFJTNFBOUGPSJOEPPSVTF%3:-0$”5*0/40/-:

5IJT’JYUVSF4VQQPSUT)BSEXJSFEBOE1MVH*O*OTUBMMBUJPO 1MFBTFGPMMPXFBDIJOTUSVDUJPOUIBUTVJUTZPVSOFFE
.BEFJO$IJOB Page 1 of 4

Contents
Please make sure you have all the contents above when unpack the carton before starting the installation. Do not throw away any above parts.

F

x 1

A

x 1

G

x 1

H

x 1

B

x 1

I

x 1

C

x 2

J

x 3

K

x 1

D

x 1

Removable plug

when hardwired

L

x 2

E

x 2

M

x 2

Page 2 of 4

Assembly
1
B

Plug in Installation

2

A & B

D G

I

H

A

Push B into A to form the cage.

Assembly the backplate (D) to cage (A&B), first place the washer (G) then screw the nut (H) with wrench (I).

3

4

M

J

5
c

6

Black plug wire

Black fixture wire

White plug wire

White fixture wire

F L

Mark the position for mounting

universal plate (F), insert the screws

(E) to plate before mounting,

insert Anchor (L) to wall,

Mount the wall lamp to the

K

secure the place with screw (M)

universal plate and secure

the decor nuts (C) to screws

Wire the black and white wires from cage input wire to plugs black and white wire, please alway connect Black to Black, White to White.
Put the Bulk (K) to socket

Plug the plug into socket and turn the light on /off, if not being lit up, unplug and check the wiring on step 3 or the bulb, then try turning on or off again.

Page 3 of 4

Assembly

#

Hardwired Installation

A & B

%

(

*

)

” Push B into A to form the cage.

Assembly the cover (D) to the cage (A&B)
Loose and remove the cable from cov er for hardwired installation

&

Black supply wire

Black fixture wire

White supply wire

White fixture wire

D

‘

Mount the universal plate (F) Mount the wall lamp to the

to Junction box , secure

universal plate and secure

the plate with screws (E)

the decor nuts (C) to screws Turn on light through the switch on wall.

,

If not being lit up, please check the wiring.

Wire the black and white wires from cage input wire to supply black and white wire, please alway connect Black to Black, White to White.
Put the Bulkb (K) to socket

Page 4 of 4