Edvivi Ew6315bk Abigail 1-light Matte Black Indoor Wall Sconce Installation Guide

EW6315BK Abigail 1-Light Matte Black Indoor Wall Sconce

Product Information

This product is a lighting fixture that requires mounting and
wiring. The manufacturer part number is EW6315BK, and the customer
service number is (832) 478-8866. The product comes with a wire
connection diagram and installation instructions, which must be
followed carefully to avoid electrical shock, fire, or equipment
damage. It is recommended that the fixture be installed by a
licensed electrician.

The product includes several parts, including an existing
electrical box, a crossbar, crossbar screws, a ground wire, a
backplate, wire, and junction caps. The product is designed to be
used with an E26 light bulb, which is not included. Please note
that some parts may be pre-installed or pre-assembled.

It is important to read through all instructions carefully and
completely before beginning assembly and installation. The product
must be installed in accordance with installation instructions and
all safety and building codes. For more information on safety
instructions and warnings, please refer to the user manual.

Product Usage Instructions

1. Attach the crossbar (B) to the existing electrical box (A)
   using the two crossbar screws (C), which are not supplied and
   should already be in your box.
2. Pass the main wire (F) and ground wire (D) through the
   backplate (E) and the crossbar (B) until the end of the main wire
   (F) reaches the electrical box (A) where you can wire using
   electrician connections. Be sure when connecting the wire use
   electrician approved junction caps (G). Stow the excess wire in the
   electrical box (A).
3. Raise the backplate (E), attach backplate (E) to ceiling, and
   hold the backplate (E).
4. Lock together the assembled fixture (1) and the backplate (E)
   by turning clockwise until it is securely in place.
5. Install the light bulb (not included) with an E26 base into the
   fixture (1).
6. Turn on the power and test the fixture to ensure it is working
   properly.

Please note that improper installation may cause electrical
shock, fire, or equipment damage. The person performing the
installation must be familiar with the construction and operation
of the product and associated hazards. If you have any questions or
concerns about installing or using this product, please contact
customer service for assistance.

GND

MOUNTING AND WIRING
WARNING:
Improper installation may cause electrical shock, fire, or equipment damage. The person performing the installation must be familiar with the construction and operation of the product and associated hazards
G
BCD F A
E
Wire Connection Diagram:

lnstallation lnstructions
Manufacturer Part Number: EW6315BK
Customer Service Number: (832) 478-8866 Customer Service Email: [email protected] Please include your name, contact methods, product name, and model number in the email.
IMPORTANT SAFETY INSTRUCTIONS: . Please read through all the instructions carefully and completely before
beginning assembly and installation . This product must be installed in accordance with installation instructions
and all safety and building codes. It is strongly suggested that all direct wired fixtures be installed by a licensed electrician . Be sure the electricity to the wires you are working on is shut off; either the fuse is removed or the circuit breaker is turned off. Turning the power off using the light switch is not sufficient to prevent electrical shock

Please proceed in an alphabetical order:
. A.Existing EIextricaI BOX B.Crossbar C.Crossbar Screws D.Ground Wire E.Backplate F.Wire G.Junction Caps
. attach the crossbar(B)to the existing eIectricaI box(A) using the two crossbar screws(C)which are not suppIied and shouId aIready in your box.
. Pass the main wire(F)and ground wire(D)through the Backplate(E)and the crossbar(B)untiI the end of the main wire(F)reaches the eIectricaI box (A)where you can wire use eIectrician connections.Be sure when connecting the wire use eIectrician approved junction caps(G).stow the excess wire in the eIectricaI box(A).raise the Backplate(E),attach Backplate(E)to ceiIing,and hoId the Backplate(E).

WARNING: This product can expose you
to chemicals including lead,which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more infomation go to www.P65Warnings.ca.gov

PART LIST AND ASSEMBLY ILLUSTRATION
Note: Some parts may be pre-installed or pre-assembled.

ASSEMBLING, INSTALLATION, AND MOUNTING

(1)*1PC (2)*1PC (3)*2PC (4)*1PC
(5)*1PC
Light Bulb (Not included)
E26

1: Lock together

References

• connections.Be
• P65Warnings.ca.gov