True Fine Td10028w Wall Sconce Instruction Manual

• Hardware Used:
• BB Wire nut x3

• Hardware Used:
• AA Long mounting screw x 2
• DD Crossbar x 1

Print in china

Product Usage Instructions

1. Ensure that the wall sconce is properly installed and
   secure.
2. Connect the wires to a power source according to the
   instructions provided. Make sure to attach the copper wire to the
   ground wire, and tape the wire nuts and wires together.
3. Attach the shade to the fixture by removing the socket ring and
   placing the shade over the socket of the fixture. Secure the shade
   with the socket ring.
4. Install a standard-base light bulb (not included) into the
   fixture.
5. Turn on the power and test the wall sconce to ensure it is
   functioning properly.

Wall Sconce

Instruction Manual

HARDWARE CONTENTS(shown actual size)

ABA

BBB

CBC

DBD

Print in china

PACKAGE CONTENTS

A

B

C

PART

DESCRIPTION

A Fixture

A Shade

A Socket ring (preassembled to Fixture (A))

QUANTITY 1 3 3

Long monting x 2 screw

Wire nut x 3

Long monting x 2 screw

Mounting plate (Not actual size) x 1

SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING
· TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). · MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Times: 25 minnutes Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses. Helpful Tools (not included): Wire strippers, Step ladder.
Customer Service: [email protected]

ASSEMBLY INSTRUCTIONS

1. Attach the mounting plate (DD) to the

1

outlet box (not included) with the long

mounting screws (CC).

Hardware Used

CC Long mounting screw

x 2

DD Crossbar

x 1

2. Strip 3/4 in. of insulation from wire ends. 2 Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box.

3. Attach wire nuts (BB).Tape wire nuts (BB) 3 and wires together.
Hardware Used

BB Wire nut

x3

BB

DD CC

ASSEMBLY INSTRUCTIONS

4. Align the 2 screws(AA) through the holes 4

of the back plate, and fix them with screw

DD

nuts

A

Hardware Used

AA Long mounting screw

x 2

DD Crossbar

x 1
AA

5. Remove socket ring (C). Install shade (B) 5

over socket of fixture (A), then secure with

A

A
socket ring (C).

B C

6. Install light bulb (not included). Use one 6 standard-base bulbs.

Print in china

References

• Digital Services, Technology and Consulting | Reply