4041-84 Acacia 5 Inch 1-Light Brushed Nickel Vanity Light
Product Information
The product is a light fixture with item number 4041-84. It
comes with a mounting plate, ground screw, mounting screws, body,
glass shade, metal rings, and a medium base (E26) bulb. The fixture
can accommodate up to 60 watts each or CFL or LED equivalent bulbs.
The installation manual includes instructions for mounting the
fixture, connecting the wires, and finishing the installation.
Product Usage Instructions
- Shut off power at the fuse box or circuit breaker and remove
the old fixture included the mounting hardware. - Unpack the new fixture and lay out all the parts on a clean
area. Take care not to lose any small parts necessary for
installation. - Place the mounting plate over the outlet box and align the
mounting slots of the plate with mounting holes of the outlet box.
Use a level to make sure the plate is straight. Feed the mounting
screws through the slots on the plate and into the holes of the
outlet box. Make sure the side of the mounting plate marked GND
must face out. - Connect the electrical wires as shown in Fig.2, making sure
that all wire connectors are secured. If your outlet box has a
ground wire (green or bare copper), connect the fixture’s ground
wire to it. Otherwise, connect the fixture’s ground wire directly
to the mounting plate using the green screw provided. Tuck wire
connections neatly inside the outlet box. - Thread fixture screws through body and into mounting plate to
secure fixture body. - Place glass shade over sockets and secure it using metal
rings. - Install one medium base (E26) bulb up to 60 watts each or CFL
or LED equivalent (not included) in accordance with the fixture
specification. DO NOT EXCEED THE MAXIMUM WATTAGE RATING! - Turn on power and test the fixture.
Note: The illustration in the manual is for installation
purposes only and may or may not be identical to the fixture
purchased.
INSTALLATION INSTRUCTIONS
Item#4041-84 (New. 05/18/2021) READ AND SAVE THESE INSTRUCTIONS
W ARNI N G ! SHUT P O WE R O FF AT F US E O R CI RC UI T BRE AK E R.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
MOUNTING THE FIXTURE (Fig.1) 1. Shut off power at the fuse box or circuit breaker and
remove the old fixture included the mounting hardware. 2. Carefully unpack your new fixture and lay out all the parts
on a clean area. Take care not to lose any small parts necessary for installation. 3. Place mounting plate (B) over the outlet box (A) (Not included) and align mounting slots of mounting plate (B) with mounting holes of outlet box (A). Use a level to make sure mounting plate (B) is straight. Feed mounting screws (C) through mounting slots on mounting plate (B) and into mounting holes of outlet box (A). Make sure the side of the mounting plate marked “GND” must face out.
Fig.1
Set# A-021-195120 -Mounting Plate -Ground Screw -Mounting Screw*2
CONNECTING THE WIRES (Fig.2) 4. Connect the electrical wires as shown in Fig.2, making
sure that all wire connectors (D) are secured. If your outlet box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate (B) using the green screw provided. 5. Tuck wire connections neatly inside the outlet box.
FINISHING THE INSTALLATION (Fig.1) 6. Thread fixture screws (F) through body (E) and into
mounting plate (B) to secure fixture body (E). 7. Place glass shade (G) over sockets and secure glass
shade (G) using metal rings (H). 8. Install (1) one medium base (E26) bulb (I) up to 60 watts
each or CFL or LED equivalent (not included) in accordance with the fixture specification–DO NOT
EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS
DEPASSER LA PUISSANCE NOMINALE MAXIMALE!).
Your installation is now complete. Return power and test the fixture.
Note: Illustration (Fig.1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.
Fig.2
FIXTURE WIRES Black or Smooth
FIXTURE WIRES White or Ribbed
FIXTURE WIRES Green or Bare Copper (Ground)
HOUSE WIRES Black (Hot)
HOUSE WIRES White (Neutral)
HOUSE WIRES Green (Ground)
4041-84
