4044-84 Acacia 33.75 Inch 4-Light Brushed Nickel Vanity Light
Product Information:
Product Name: Item#4044-84
Date of Manufacture: 05/18/2021
Installation Instructions: READ AND SAVE THESE
INSTRUCTIONS
Product Usage Instructions:
Mounting the Fixture (Fig.1):
- Shut off power at the fuse box or circuit breaker and remove
the old fixture including the mounting hardware. - Carefully unpack your new fixture and lay out all the parts on
a clean area. Take care not to lose any small parts necessary for
installation. - Place mounting plate (B) over the outlet box (A) and align
mounting slots of mounting plate (B) with mounting holes of outlet
box (A). Use a level to make sure mounting plate (B) is
straight. - Feed mounting screws (C) through mounting slots on mounting
plate (B) and into mounting holes of outlet box (A). Make sure the
side of the mounting plate marked GND must face out.
Connecting the Wires (Fig.2):
- Connect the electrical wires as shown in Fig.2, making sure
that all wire connectors (D) are secured. If your outlet box has a
ground wire (green or bare copper), connect the fixture’s ground
wire to it. Otherwise, connect the fixture’s ground wire directly
to the mounting plate (B) using the green screw provided. - Tuck wire connections neatly inside the outlet box.
Finishing the Installation (Fig.1):
- Thread fixture screws (F) through body (E) and into mounting
plate (B) to secure fixture body (E). - Place glass shade (G) over sockets and secure glass shade (G)
using metal rings (H). - Install (4) four medium base (E26) bulbs (I) up to 60 watts
each or CFL or LED equivalent (not included) in accordance with the
fixture specification. DO NOT EXCEED THE MAXIMUM WATTAGE
RATING!
Your installation is now complete. Return power and test the
fixture.
Note: Illustration (Fig.1) on this manual is for installation
purposes only. It may or may not be identical to the fixture
purchased.
INSTALLATION INSTRUCTIONS
Item#4044-84 (New. 05/18/2021) READ AND SAVE THESE INSTRUCTIONS
W ARNI N G ! SHUT P O WE R O FF AT F US E O R CI RC UI T BRE AK E R.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
MOUNTING THE FIXTURE (Fig.1) 1. Shut off power at the fuse box or circuit breaker and
remove the old fixture included the mounting hardware. 2. Carefully unpack your new fixture and lay out all the parts
on a clean area. Take care not to lose any small parts necessary for installation. 3. Place mounting plate (B) over the outlet box (A) (Not included) and align mounting slots of mounting plate (B) with mounting holes of outlet box (A). Use a level to make sure mounting plate (B) is straight. Feed mounting screws (C) through mounting slots on mounting plate (B) and into mounting holes of outlet box (A). Make sure the side of the mounting plate marked “GND” must face out.
Fig.1
Set# A-021-195120 -Mounting Plate -Ground Screw -Mounting Screw*2
CONNECTING THE WIRES (Fig.2) 4. Connect the electrical wires as shown in Fig.2, making
sure that all wire connectors (D) are secured. If your outlet box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate (B) using the green screw provided. 5. Tuck wire connections neatly inside the outlet box.
FINISHING THE INSTALLATION (Fig.1) 6. Thread fixture screws (F) through body (E) and into
mounting plate (B) to secure fixture body (E). 7. Place glass shade (G) over sockets and secure glass
shade (G) using metal rings (H). 8. Install (4) four medium base (E26) bulbs (I) up to 60 watts
each or CFL or LED equivalent (not included) in accordance with the fixture specification–DO NOT
EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS
DEPASSER LA PUISSANCE NOMINALE MAXIMALE!).
Your installation is now complete. Return power and test the fixture.
Note: Illustration (Fig.1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.
Fig.2
FIXTURE WIRES Black or Smooth
FIXTURE WIRES White or Ribbed
FIXTURE WIRES Green or Bare Copper (Ground)
HOUSE WIRES Black (Hot)
HOUSE WIRES White (Neutral)
HOUSE WIRES Green (Ground)
4044-84
