2734-709 Graham Avenue 4-Light Vanity Light
Product Information
The product is a fixture, identified by item number 2734-709 and
manufactured on February 17, 2022. The fixture includes a mounting
plate, screws, a ground screw, a metal ring, and a glass shade. The
product can accommodate up to four candelabra base bulbs with a
maximum wattage of 60 watts each or CFL/LED equivalent bulbs (not
included). The fixture has black/smooth and white/ribbed wires for
connection, and a green/bare copper wire for grounding.
Product Usage
- Shut off power at the fuse box or circuit breaker box.
- Remove the old fixture, including the mounting hardware.
- Unpack the new fixture and lay out all parts in a clear area.
Take care not to misplace any small parts necessary for
installation. - Loosen screws (D) to remove mounting plate (A) from fixture
body (C). - Position mounting plate (A) on the wall and mark the location
of four drywall anchors (I). Pre-drill the holes for the drywall
anchors (I). Insert the drywall anchors (I) into the wall. - Attach mounting plate (A) to junction box (not included) with
mounting screws (B) (Size: #8-32N*L0.5). The side of the mounting
plate (A) marked GND and two convex points must face out. - Connect the electrical wires as shown in Fig. 2, making sure
that all wire connectors are secured. If your junction box has a
ground wire (green or bare copper), connect the fixture’s ground
wire to it. Otherwise, connect the fixture’s ground wire directly
to the mounting plate (A) using the green screw provided. After the
wires are connected, tuck them carefully inside the junction
box. - Place fixture body (C) over mounting plate (A) and secure with
screws (D). - Place glass shade (F) over socket (E) and secure with metal
ring (G). - Install four candelabra base bulbs (H) up to 60 watts each or
CFL/LED equivalent (not included) in accordance with the fixture
specification — DO NOT EXCEED THE MAXIMUM WATTAGE RATING! - Turn on power and test the fixture.
INSTALLATION INSTRUCTIONS
Item#2734-709 (New. 2022/02/17) READ AND SAVE THESE INSTRUCTIONS
W AR N I N G ! S HU T P O WE R O F F AT F U S E O R CI R C UI T B R E AK E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
MOUNTING THE FIXTURE (Fig.1)
Fig. 1
1. Shut off power at the fuse box or circuit breaker box
and remove the old fixture including the mounting hardware. 2. Carefully unpack your new fixture and lay out all the
Set#A-021-170118A -Mounting screw*2
-Ground screw -Mounting plate
parts in a clear area. Take care not to misplace any
small parts necessary for installation.
3. Loosen screws (D) to remove mounting plate (A) from
fixture body (C). 4. Position mounting plate (A) on the wall and mark the
location of four drywall anchors (I). Pre-drill the holes
I
A
J
B
for the drywall anchors (I). Insert the drywall anchors
(I) into the wall.
5. Attach mounting plate (A) to junction box (not included)
with mounting screws (B) (Size: #8-32N*L0.5″). The
side of the mounting plate (A) marked “GND” and two
convex points must face out.
6. Place woodscrews (J) through holes into the drywall
anchor (I) to secure the mounting plate (A) as shown in
Fig.1.
CONNECTING THE WIRES (Fig. 2)
7. Connect the electrical wires as shown in Fig. 2, making
sure that all wire connectors are secured. If your
junction box has a ground wire (green or bare copper),
connect the fixture’s ground wire to it. Otherwise,
connect the fixture’s ground wire directly to the
mounting plate (A) using the green screw provided.
After the wires are connected, tuck them carefully
inside the junction box.
FINISHING THE INSTALLATION (Fig.1) 8. Place fixture body (C) over mounting plate (A) and
secure with screws (D). 9. Place glass shade (F) over socket (E) and secure with
Fig. 2
FIXTURE WIRES Black or Smooth
FIXTURE WIRES White or Ribbed
metal ring (G).
10. Install (4) four candelabra base bulbs (H) up to 60
watts each or CFL or LED equivalent (not included) in accordance with the fixture specification — DO NOT
HOUSE WIRES Black (Hot)
EXCEED THE MAXIMUM WATTAGE RATING! (NE
PAS DEPASSER LA PUISSANCE NOMINALE
MAXIMALE!)
Your installation is now complete. Return power and
test the fixture.
D C
HOUSE WIRES White (Neutral)
FIXTURE WIRES Green or Bare Copper (Ground)
E F G H
HOUSE WIRES Green (Ground)
Note: Illustration (Fig.1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.
LA-3523E
