3363-416 Monico Vanity Bath Light
Product Information:
The product is an electrical fixture with item number 3363-xxx.
It comes with a mounting plate, ground screw, and junction box
screw. The fixture wires include black or smooth, white or ribbed,
and green or bare copper (ground), while the house wires consist of
black (hot), white (neutral), and green (ground). The product
manual includes two illustrations, Fig. 1 for mounting the fixture
and Fig. 2 for electrical wiring.
Product Usage Instructions:
- Before installation, ensure that power is shut off at the fuse
box or circuit breaker box. - Mount the fixture using the mounting plate, ground screw, and
junction box screw according to Fig. 1 in the manual. - Connect the fixture wires to the house wires according to Fig.
2 in the manual. The black or smooth fixture wire should be
connected to the black (hot) house wire, the white or ribbed
fixture wire should be connected to the white (neutral) house wire,
and the green or bare copper fixture wire should be connected to
the green (ground) house wire. - Once all wires are connected, turn on power at the fuse box or
circuit breaker box. - Test the fixture to ensure it is functioning properly.
INSTALLATION INSTRUCTIONS
Item#3363-xxx (New. 06/16/2021)
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
MOUNTING THE FIXTURE (Fig.1) 1. Shut off power at the fuse box or circuit breaker box
and remove the old fixture including the mounting hardware. 2. Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to misplace any small parts necessary for installation. 3. Attach the mounting plate (A) to the junction box using the junction box screws (B) (SIZE: #8-32N, L0.5″). The side of the mounting plate marked “GND”must face out. CONNECTING THE WIRES (Fig. 2) 4. At this point, connect the electrical wires as shown in Fig. 2, making sure that all wire connectors are secured. If your outlet box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate (A) using the green screw provided. After the wires are connected, tuck them carefully inside the junction box. FINISHING THE INSTALLATION (Fig.1) 5. Place the fixture body (C) over the mounting plate (A), and secure with mounting screws (D). 6. Align the glass shape (F) and screw shell (G) over the socket (E), and fasten with screw shell (G). 7. Install (3) three medium base bulbs (H) up to 100 watts each or CFL or LED equivalent (not included) in accordance with the fixture specification — DO NOT EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!)
Your installation is now complete. Return power and test the fixture.
Fig. 1 Set#A-021-118DE -Mounting Plate -Ground Screw -Junction Box Screw*2
Outlet Box B C
A
E F
G
D H
Fig. 2
FIXTURE WIRES Black or Smooth
FIXTURE WIRES White or Ribbed
FIXTURE WIRES Green or Bare Copper (Ground)
HOUSE WIRES Black (Hot)
HOUSE WIRES White (Neutral)
HOUSE WIRES Green (Ground)
Note: Illustration (Fig.1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.
LA-3121E
