JYL7129A 30 Inch Bath Vanity Light
Product Information
The product is a lamp with model number JYL7129A. The lamp has
an external flexible cable or cord that cannot be replaced if
damaged. The lamp includes a mounting bracket, wire connectors,
machine screws, ground screw, mounting screws, metal plate, and
canopy. The product dimensions are 5H/30Lx4.375Wx3.125H.
Product Usage Instructions
- Inspect the item carefully before attempting to install. If
there is any damage or obvious defect, do not install. The item may
not be returned once it has been installed. - Before beginning assembly of the product, make sure all parts
are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to
assemble the product. - Fix the mounting bracket (B) to the outlet box using mounting
screw (F). - Make wire connections using wire connectors (A). Connect Hot,
Black or Red Outlet Supply Wire to Black Parallel Cord (round &
smooth) and Connect Neutral, White Outlet Supply Wire to White
Parallel Cord (square & ridged). For Clear, Brown, Gold or
Black without Tracer (colored stripes) and Clear, Brown, Gold or
Black with Tracer (colored stripes), use Insulated Wire (not green)
with copper metal conductor and Insulated Wire (not green) with
Silver metal conductor respectively. - For installation in the United States, wrap ground wire from
outlet box around green ground screw (E) on mounting bracket, no
less than 2 from wire end. Tighten ground screw. If the fixture is
supplied with a ground wire, connect it to outlet ground wire with
a wire connector. For installation in Canada, if the fixture is
supplied with ground wire, wrap ground wire around green grounding
screw on mounting bracket. Tighten ground screw. - Remove packaging from fixture and fix the canopy (D) to bracket
(B) using machine screw (C). - To clean the outside of the fixture, use a dry or slightly
dampened clean cloth (use the surface of the fixture. To clean the
inside of the fixture, first disconnect power to the fixture by
turning off the circuit breaker or fuse at the fuse box. Next, use
a dry or slightly dampened clean cloth (use clean water, never a
solvent) to wipe the interior surface of the fixture. Do not use
any cleaners with chemical, solvents or harsh abrasives. Use only a
dry soft cloth to dust or wipe carefully.
Enjoy your lamp!
WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use the surface of the fixture.
To clean the inside of the fixture, first disconnect power to the fixture by
clean water,
turning off
never a solvent) to wipe
the circuit breaker or
Model JYL7129A
bPyrroedmuocvtiDngimtheensio
fuse at the fuse box. Next, use a dry or slighly damperned clean clorth (use clean water, never a solvent) to wipe the
interior surface of the fixture.
Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
8C/JYL7129A
5″H/ 30″Lx4.375″Wx3.125″H
5
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use
and installation
* The external flexible cable or cord of this lamp cannot be replaced
If the cord is damaged, the lamp shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A wire connector
mounting
B
bracket
C machine screw
3X
E
ground screw
1X
1X
F mounting screw
2X
2X
G the metal plate
2X
D
canopy
1X
12
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 20 minutes.
1. Fix the mounting bracket(B) to the outlet boxmwoituhnting scre(wF). 2. Make wire connections, with wire connectors(A), following the reference chart listed below.
Connect, Hot, Black or Red Outlet Supply Wire to:
Black * Parallel Cord (round & smooth)
Connect, Neutral, White Outlet Supply Wire to:
White * Parallel Cord (square & ridged)
Clear, Brown, Gold or Black without Tracer (colored stripes) Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor Insulated Wire (not green) with Silver metal conductor
*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )
Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet box around green
ground screw(E) on mounting bracket, no less than 2″ from wire end. Tighten ground screw.
If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire
D C F GE B
A
around green grounding screw on mounting bracket. Tighten ground screw.
3. Carefully remove packaging from fixture, fix the canopy(D) to bracket(B) usminagchine screw(C).
ENJOY YOUR LAMP
22
