2471-84 Chatham Square 5.5 Inch 1-Light Brushed Nickel Vanity Light
Product Information
Product Name: Item#2471-84
Manufacturer: Not specified
Date of Manual: New. 8/13/2021
Installation Instructions
Mounting the Fixture (Fig.1)
- Shut off power at the fuse box or circuit breaker box.
- Remove the old fixture, including the mounting hardware.
- Carefully unpack your new fixture and lay out all the parts in
a clear area. Take care not to misplace any small parts necessary
for installation. - Loosen screws (D) to remove mounting plate (A) from fixture
body (C). - Attach the mounting plate (A) to the junction box (not
included) using the mounting screws (B) (SIZE: #8-32N, L0.5). The
side of the mounting plate marked GND must face out.
Connecting the Wires (Fig. 2)
Refer to Fig. 2 for wire connections:
- Connect the black or smooth fixture wires to the black (hot)
house wires. - Connect the white or ribbed fixture wires to the white
(neutral) house wires. - Connect the green or bare copper fixture wires (ground) to the
green (ground) house wires.
Note: The illustration (Fig.1) in this manual is for
installation purposes only and may or may not be identical to the
fixture purchased.
Your installation is now complete. Return power and test the
fixture.
Model: LA-3469E
INSTALLATION INSTRUCTIONS
Item#2471-84 (New. 8/13/2021) READ AND SAVE THESE INSTRUCTIONS
W AR N I N G ! S HU T P O WE R O F F AT F U S E O R CI R C UI T B R E AK E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
MOUNTING THE FIXTURE (Fig.1) 1. Shut off power at the fuse box or circuit breaker box
and remove the old fixture including the mounting hardware. 2. Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to misplace any small parts necessary for installation. 3. Loosen screws (D) to remove mounting plate (A) from fixture body (C). 4. Attach the mounting plate (A) to the junction boxnot included using the mounting screws (B) (SIZE:
#8-32N, L0.5″). The side of the mounting plate marked “GND”must face out.
CONNECTING THE WIRES (Fig. 2) 5. Connect the electrical wires as shown in Fig. 2,
making sure that all wire connectors are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate (A) using the green screw provided. After the wires are connected, tuck them carefully inside the junction box. FINISHING THE INSTALLATION (Fig.1) 6. Place fixture body (C) over mounting plate (A) and secure with screws (D). 7. Slide glass shade (E) followed by metal ring (F) over the socket and secure using tool (G). 8. Install (1) one medium base bulb (H) up to 60 watts each or CFL or LED equivalent (not included) in accordance with the fixture specification–DO NOT EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!)
Fig. 1
Set#A-021-178110 -Mounting plate -Ground screw
– Mounting screw*2 A
CD
E B
F G H
Fig. 2
FIXTURE WIRES Black or Smooth
FIXTURE WIRES White or Ribbed
FIXTURE WIRES Green or Bare Copper (Ground)
HOUSE WIRES Black (Hot)
HOUSE WIRES White (Neutral)
HOUSE WIRES Green (Ground)
Note: Illustration (Fig.1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.
Your installation is now complete. Return power and test the fixture.
LA-3469E
