2463-691 Waverly Plaza 23.25 Inch 3 Light Brushed Nickel and Coal Vanity Light
Product Information:
The product being referred to in these instructions is
Item#2463-691, a fixture that can be mounted on a wall. It comes
with a mounting plate (Set#A-021-115123A), ground screw, and two
mounting screws. The fixture requires three medium base bulbs up to
60 watts each or CFL or LED equivalent, which are not included. The
fixture has wires that need to be connected to the house wires,
which include black (hot), white (neutral), and green (ground)
wires. The maximum wattage rating for the fixture needs to be
followed, and the installation should be completed carefully.
Product Usage Instructions:
- Shut off power at the fuse box or circuit breaker box and
remove the old fixture including the mounting hardware. - Unpack the new fixture and lay out all the parts in a clear
area. Take care not to misplace any small parts necessary for
installation. - Attach the mounting plate (Set#A-021-115123A) to the junction
box using the mounting screws provided (SIZE: #8-32N, L0.5). The
side of the mounting plate marked GND must face out. - Connect the fixture wires to the house wires as shown in Fig.2,
making sure all wire connectors are secured. Connect the fixture’s
ground wire to the house’s ground wire or directly to the mounting
plate using the green screw provided. - Place fixture body over mounting plate and secure with
screws. - Place decorative holder and glass shade over socket and secure
with socket ring. - Install three medium base bulbs up to 60 watts each or CFL or
LED equivalent (not included) according to fixture specifications.
Do not exceed the maximum wattage rating. - Turn on the power and test the fixture.
Note: The illustration in Fig.1 is for installation purposes
only and may or may not be identical to the fixture purchased.
INSTALLATION INSTRUCTIONS
Item#2463-691 (New. 07/27/2021) READ AND SAVE THESE INSTRUCTIONS
W AR N I N G ! S HU T P O WE R O F F AT F U S E O R CI R C UI T B R E AK E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
MOUNTING THE FIXTURE (Fig.1)
Fig. 1
1. Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the
Set#A-021-115123A -Mounting plate -Ground screw – Mounting screw*2
parts in a clear area. Take care not to misplace any
small parts necessary for installation.
I
3. Attach the mounting plate (A) to the junction boxnot
included using the mounting screws (B) (SIZE:
H
#8-32N, L0.5″). The side of the mounting plate
marked “GND”must face out.
G
CONNECTING THE WIRES (Fig. 2)
4. Connect the electrical wires as shown in Fig. 2,
making sure that all wire connectors are secured. If your junction box has a ground wire (green or bare
A B
D
F
copper), connect the fixture’s ground wire to it.
C
E
Otherwise, connect the fixture’s ground wire directly
to the mounting plate (A) using the green screw
provided. After the wires are connected, tuck them
carefully inside the junction box.
FINISHING THE INSTALLATION (Fig.1)
5. Place fixture body (C) over mounting plate (A) and
secure with screws (D).
6. Place decorative holder (F) and glass shade (G) over socket (E) and secure with socket ring (H).
7. Install (3) three medium base bulbs (I) up to 60 watts
each or CFL or LED equivalent (not included) in
Fig. 2
FIXTURE WIRES Black or Smooth
FIXTURE WIRES White or Ribbed
FIXTURE WIRES Green or Bare Copper (Ground)
accordance with the fixture specification–DO NOT
EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!)
Your installation is now complete. Return power and test the fixture.
HOUSE WIRES Black (Hot)
HOUSE WIRES White (Neutral)
HOUSE WIRES Green (Ground)
Note: Illustration (Fig.1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.
LA-3442E
