10910 Miro Painting Light
Product Information
- Product Name: MIRO 10910
- Power Requirement: 220-240V ~50Hz
- Manufacturer Website: www.aneta.se, www.aneta.no
- Energy Efficiency Class: E
- Light Source Lifetime: 50,000 hours or 22 years (6 hours per
day) - Light Source Type: LED
- Mains or Non-Mains: Non-Mains
- Directional or Non-Directional: Non-Directional
- Connected L.S.: No
- Color-tuneable: No
- Envelope: No
- High Luminance: No
- Anti-Glare Shield: No
- Dimmable: Yes
- Energy Consumption in On-Mode: 6 kWh / 1000 h
- Useful Luminous Flux: 737 lm
- CCT Colour Temperature: 3000 K
- On-Mode Power: 5 W
- Stand-by Power: 0 W
- Networked Standby Power: 0 W
- CRI: 80
- R9 Color Rendering Index: 0
- Chromaticity Coordinates: x:0.401, y:0.411
- SDCM: < 6
- Measures LxBxH: mm
- Supply Current: 430 mA
Product Usage Instructions
Before using the MIRO 10910 luminaire, make sure that the power
requirement of your location matches the product’s power
requirement of 220-240V ~50Hz.
The MIRO 10910 uses a non-replaceable LED light source with a
lifetime of 50,000 hours or 22 years (6 hours per day). When the
light source reaches its end of life, the whole luminaire shall be
replaced.
The MIRO 10910 is a non-directional luminaire that is dimmable.
To turn it on, connect it to a power source and use a compatible
dimmer switch to adjust the brightness. The MIRO 10910 has an
energy consumption of 6 kWh / 1000 h in on-mode and a useful
luminous flux of 737 lm with a CCT colour temperature of 3000
K.
The MIRO 10910 has a CRI of 80, which means it accurately
represents colors in comparison to natural light. It also has an R9
color rendering index of 0, which means it does not accurately
represent reds in comparison to natural light. The chromaticity
coordinates of the MIRO 10910 are x:0.401, y:0.411, and its SDCM is
less than 6.
When using the MIRO 10910, make sure to follow the
manufacturer’s instructions for installation and maintenance. Do
not attempt to replace the LED light source when it reaches its end
of life, as the whole luminaire shall be replaced.
MIRO 10910
220-240V ~50Hz
www.aneta.se www.aneta.no
SE: Denna produkt innehåller en ljuskälla med energieffektivitetsklass E. Lysdioden i armaturen är inte utbytbar, när ljuskällans livstid är slut ska hela armaturen bytas. 50 000 tim 22 år (6 tim/dag)
NO: Dette produktet inneholder en lyskilde med energieffektivitetsklasse E. Diodelyskilden i armaturen er ikke utskiftbar, når lyskildens levetid er slutt skal hele armaturen byttes. 50 000 tim 22 år (6 tim/dag)
FI: Tämä tuote sisältää valonlähteen, jonka energiatehokkuusluokka on E Valaisimen valolähde ei ole vaihdettavissa. Kun valolähteen elinkaari on loppu niin koko valaisin on vaihdettava. 50 000 tuntia 22 vuotta (6 t/päivä)
EN: This product contains a light source of energy efficiency class E. The diode lamp of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced. 50 000 h 22 years (6 h/day)
Light Source :
Lighting technology used: …………….. LED
Mains or non-mains: ……………………. non-mains
Directional or non-directional: ……….. non-directional
Connected L.S.: ………………………….. no
Color-tuneable: …………………………… no
Envelope: ……………………………………no
High luminance: ………………………….. no
Anti-glare shield: …………………………. no
Dimmable: …………………………………. yes
Energy consumption in on-mode: ….. 6 kWh / 1000 h
Energy efficiency class (A-G): ………. E
Useful luminous flux:……………………. 737 lm
CCT colour temperature:………………. 3000 K
On-mode power: …………………………. 5 W
Stand-by power: …………………………..0 W
Networked standby power: …………….0 W
CRI: …………………………………………… 80
R9 color rendering index: ………………0
Chromaticity coordinates: …………….. x:0.401, y:0.411
SDCM: ………………………………………. < 6
LLiufemtiemnemLa70inBt5e0:n.c.e…f.a..c..t.o..r.:………………………………..
50 000 0,96
hours
Survival factor: …………………………… 0,90
Measures LxBxH: ……………………….. mm
Supply current: …………………………… 430 mA
* The luminous flux stated here is the value for the light source itself in accordance with Regulation (EU) 2019/2015. On the box the luminous flux for the lighting fittting is stated, where the light is partly absorbed by glass/glare shield/shade and parts of the fitting, why it is lower than for the light source.
Forside - Aneta Lighting
Framsida - Aneta Lighting
