Hytronik Hbir31 Pir Standalone Motion Sensor Instruction Manual (+ PDF)

Contents hide

HBIR31 PIR Standalone Motion Sensor

Product Information:

The PIR Standalone Motion Sensor with 5.0 SIG Mesh is available
in four different models: HBIR31, HBIR31/R, HBIR31/H, and
HBIR31/RH. These sensors are designed for indoor applications such
as offices, classrooms, healthcare facilities, and other commercial
areas. They come with a built-in 80mA DALI power supply that can
control up to 40 LED drivers. The sensors utilize Bluetooth
wireless mesh networking technology, allowing easy communication
between luminaires without the need for hardwiring. This feature is
particularly beneficial for retrofit upgrade projects, as it helps
save costs and installation time. The sensors also offer simple
device setup and commissioning through a smartphone app.

Key Features:

80mA DALI broadcast output for up to 40 LED drivers
Support to control DT8 LED drivers
2 push inputs for flexible manual control
Ceiling/surface mount box available as an accessory
Two types of blind inserts/blanking plates
User-friendly design for installation
High bay version available (up to 15m in height)
5-year warranty
5.0 SIG mesh
Compatible with iOS and Android platforms
Smartphone app available for both iOS and Android
iPad app available (Koolmesh Pro app)
Web app/platform: www.iot.koolmesh.com
Fully supports EnOcean self-powered switch module PTM215B
(HBES01/W & HBES01/B)

Product Usage Instructions:

Install the PIR Standalone Motion Sensor at the desired
location in your indoor area. Ensure that the installation height
is appropriate for the specific model you are using (6m for HBIR31,
15m for HBIR31/R, 20m for HBIR31/H).
Connect the sensor to a power source with an operating voltage
of 220-240VAC and 50/60Hz frequency.
For manual control, utilize the 2 push inputs provided by the
sensor.
If required, use the ceiling/surface mount box or blind
inserts/blanking plates available as accessories to enhance the
installation.
Download the smartphone app for your respective platform (iOS
or Android) from the app store.
Launch the app and follow the on-screen instructions to set up
and commission the sensor.
To control DT8 LED drivers, ensure that they are supported by
the sensor.
For further details on detection range and patterns, refer to
the detection pattern section of the user manual.
Refer to the provided links for precautions regarding Bluetooth
product installation and operation, as well as PIR Sensors
installation and operation.
For any changes or updates, always refer to the most recent
release on the manufacturer’s website.
For information on the warranty policy, consult the Hytronik
Standard Guarantee Policy available on the manufacturer’s
website.

View Fullscreen

PIR Standalone Motion Sensor with

5.0 SIG Mesh

HBIR31 HBIR31/R HBIR31/H HBIR31/RH

Low-bay Reinforced Low-bay High-bay

Reinforced High-bay

Product Description

HBIR31 is a Bluetooth PIR standalone motion sensor with 80mA DALI

power supply built in, which can control up to 40 LED drivers. It is

ideal for typical indoor applications such as office, classroom,

healthcare and other commercial areas. With Bluetooth wireless mesh

networking, it makes communication between luminaires much easier

without time-consuming hardwiring, which eventually saves costs for

projects (especially for retrofit upgrade projects!). Meanwhile, simple

device setup and commissioning can be done via

app.

HBIR31

RED
HBIR31/R

App Features Quick setup mode & advanced setup mode Tri-level control Daylight harvest Floorplan feature to simplify project planning Web app/platform for dedicated project management Koolmesh Pro iPad version for on-site configuration Grouping luminaires via mesh network Scenes Detailed motion sensor settings Dusk/Dawn photocell (Twilight function) Push switch configuration Schedule to run scenes based on time and date Astro timer (sunrise and sunset) Staircase function (master & slave) Internet-of-Things (IoT) featured Device firmware update over-the-air (OTA) Device social relations check Bulk commissioning (copy and paste settings) Dynamic daylight harvest auto-adaptation Power-on status (memory against power loss) Offline commissioning Different permission levels via authority management Network sharing via QR code or keycode Remote control via gateway support HBGW01 Interoperability with Hytronik Bluetooth product portfolio Compatible with EnOcean BLE switches Continuous development in progress…
Subject to change without notice.

HBIR31/H
Hardware Features

HBIR31/RH (3-pyro)

80mA DALI broadcast output for up to 40 LED drivers

Support to control DT8 LED drivers

2 Push inputs for flexible manual control

Ceiling/Surface mount box available as accessory

Two types of blind inserts / blanking plates

User-friendly design for installation

High bay version available (up to 15m in height)

5-year warranty

5.0 SIG mesh

iOS

Android

for iOS

for Android

Smartphone app for both iOS & Android platform

for iPad Koolmesh Pro app for iPad
Web for Web
Web app/platform: www.iot.koolmesh.com

Fully support EnOcean self-powered switch module PTM215B (HBES01/W & HBES01/B)
Edition: 17 Jun. 2021 Ver. A1 Page 1/7

Technical Specifications
Bluetooth Transceiver Operation frequency Transmission power Range (Typical indoor) Protocol

2.4 GHz – 2.483 GHz 4 dBm 10~30m
5.0 SIG Mesh

Sensor Data

Sensor Model HBIR31

PIR max* detection range Installation Height : 6m Detection Range(Ø) :9m

HBIR31/R HBIR31/H HBIR31/RH

Installation Height : 6m
Detection Range(Ø) :10m
Installation height15m (forklift) 12m (person)
Detection range (Ø)24m
Installation height20m (forklift) 12m (person)
Detection range (Ø)40m

Detection angle

360O

* For more details of detection range, please refer to “detection pattern” section.

Mechanical Structure & Dimensions

Ø 66~68mm

Input & Output Characteristics

Operating voltage

220_240VAC 50/60Hz

Stand-by power

<1W

Switched power

Max. 40 devices, 80mA

Warming-up

20s

Safety & EMC EMC standard (EMC) Safety standard (LVD)
RED Certification

EN55015, EN61000, EN61547
EN60669-1, EN60669-2-1 AS/NZS60669-1/-2-1
EN300328, EN301489-1/-17 CB, CE , EMC, RED, RCM

Environment Operation temperature IP rating

Ta: -20OC ~ +50OC IP20

62 70.5 75.2
3

Ø 78

* Install blind as required

* Install lens as required

Subject to change without notice.

1. Ceiling (drill hole Ø 66~68mm) 2. Carefully prise off the cable clamps. 3. Make connections to the pluggable
terminal blocks. 4. Insert plug connectors and secure using
the provided cable clamps, then clip terminal covers to the base. 5. Fit detection blind (if required) and desired lens. 6. Clip fascia to body. 7. Bend back springs and insert into ceiling.
Edition: 17 Jun. 2021 Ver. A1 Page 2/7

Wire Preparation

0.75 – 2.5mm 7-8mm

Pluggable screw terminal. It is recommended to make connections to the terminal before fitting to the sensor.

Placement Guide and Typical Range for HBIR28/H & HBIR28/RH

Smart Phone to Device Range

6-10m

10m

Detection Pattern & Optional Accessories

The smart device with the App installed will have a typical range of 10m, but varies from device to device. During commissioning, the installer will need to be in range of the devices when searching for devices to add to the network.
Once the devices have been added to the network via the App, the devices will start communicating within the wireless mesh. This means that once the network is complete, all devices are accessible from the smart device when in a 20m range of a single point.

1. HBIR31 (Low-bay)
HBIR31: Low-bay flat lens detection pattern for single person @ Ta = 20OC (Recommended ceiling mount installation height 2.5m-6m)

A: Tangential movement

B: Radial movement

Mount height

h = max.6m

”
Tangential: max. 9m

# Radial: max. 4m

insensitive

sensitive

insensitive

sensitive

Optional Accessory — Ceiling/Surface Mount Box: HA03

2.5m 3m 4m 5m 6m

Tangential (A) max 50m2 (Ø = 8m) max 64m2 (Ø = 9m) max 38m2 (Ø = 7m) max 38m2 (Ø = 7m) max 38m2 (Ø = 7m)

Radial (B) max 13m2 (Ø = 4m) max 13m2 (Ø = 4m) max 13m2 (Ø = 4m) max 13m2 (Ø = 4m) max 13m2 (Ø = 4m)

Ø 94

Optional Accessory — Blind Insert for Blocking Certain Detection Angles
Valid Range

Valid Range

Blind Option 1 — Aisle Detection Subject to change without notice.

Blind Option 2 — 180O Detection Edition: 17 Jun. 2021 Ver. A1 Page 3/7

2. HBIR31/R (Reinforced Low-bay)
HBIR31/R: Low-bay convex lens detection pattern for single person @ Ta = 20OC (Recommended ceiling mount installation height 2.5m-6m)

A: Tangential movement B: Radial movement

Mount height

2.5m

h = max.6m

”
Tangential: max. 10m

# Radial: max. 5m

4m 5m

insensitive

sensitive

insensitive

sensitive

Optional Accessory — Ceiling/Surface Mount Box: HA03

Tangential (A) max 79m2 (Ø = 10m) max 79m2 (Ø = 10m) max 64m2 (Ø = 9m) max 50m2 (Ø = 8m) max 50m2 (Ø = 8m)

Radial (B) max 20m2 (Ø = 5m) max 20m2 (Ø = 5m) max 20m2 (Ø = 5m) max 20m2 (Ø = 5m) max 20m2 (Ø = 5m)

Ø 94

Optional Accessory — Blind Insert for Blocking Certain Detection Angles
Valid Range

Valid Range

Blind Option 1 — Aisle Detection

Blind Option 2 — 180O Detection

Subject to change without notice.

Edition: 17 Jun. 2021 Ver. A1 Page 4/7

3. HBIR31/H (High-bay)

HBIR31/H: High-bay lens detection pattern for forklift @ Ta = 20OC (Recommended ceiling mount installation height 10m-15m)

A: Tangential movement B: Radial movement

h = max.15m ”
Tangential: max. 24m

h = max.15m
# Radial: max. 16m

insensitive

sensitive

insensitive

sensitive

Mount height 10m 11m 12m 13m 14m 15m

Tangential (A) max 380m2 (Ø = 22m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m)

Radial (B) max 201m2 (Ø = 16m) max 201m2 (Ø = 16m) max 201m2 (Ø = 16m) max 177m2 (Ø = 15m) max 133m2 (Ø = 13m) max 113m2 (Ø = 12m)

HBIR31/H: High-bay lens detection pattern for single person @ Ta = 20OC (Recommended ceiling mount installation height 2.5m-12m)

A: Tangential movement

B: Radial movement

Mount height

2.5m

h = max.12m

”
Tangential: max. 20m

Radial: max. 3m

8m 10m 11m

insensitive

sensitive

insensitive

sensitive

12m

Optional Accessory — Ceiling/Surface Mount Box: HA03

Tangential (A) max 50m2 (Ø = 8m) max 104m2 (Ø = 11.5m) max 154m2 (Ø = 14m) max 227m2 (Ø = 17m) max 269m2 (Ø = 18.5m) max 314m2 (Ø = 20m)

Radial (B) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m)

Ø 94

Optional Accessory — Blind Insert for Blocking Certain Detection Angles
Valid Range

Valid Range

Blind Option 1 — Aisle Detection Subject to change without notice.

Blind Option 2 — 180O Detection Edition: 17 Jun. 2021 Ver. A1 Page 5/7

4. HBIR31/RH (Reinforced High-bay with 3-Pyro)
HBIR31/RH: Reinforced high-bay lens detection pattern for forklift @ Ta = 20OC (Recommended ceiling mount installation height 10m-20m)

A: Tangential movement B: Radial movement

h = max.20m ”
Tangential: max. 40m

h = max.20m
# Radial: max. 15m

insensitive

sensitive

insensitive

sensitive

Mount height 10m 11m 12m 13m 14m 15m 20m

Tangential (A) max 346m2 (Ø = 21m) max 660m2 (Ø = 29m) max 907m2 (Ø = 34m) max 962m2 (Ø = 35m) max 1075m2 (Ø = 37m) max 1256m2 (Ø = 40m) max 707m2 (Ø = 30m)

Radial (B) max 177m2 (Ø = 15m) max 177m2 (Ø = 15m) max 154m2 (Ø = 14m) max 154m2 (Ø = 14m) max 113m2 (Ø = 12m) max 113m2 (Ø = 12m) max 113m2 (Ø = 12m)

HBIR31/RH: Reinforced high-bay lens detection pattern for single person @ Ta = 20OC (Recommended ceiling mount installation height 2.5m-12m)

A: Tangential movement

B: Radial movement

h = max.12m
”
Tangential: max. 30m

h = max.12m

Radial: max. 4m

insensitive

sensitive

insensitive

sensitive

Mount height 2.5m 6m 8m 10m 11m 12m

Optional Accessory — Ceiling/Surface Mount Box: HA03

Tangential (A) max 38m2 (Ø = 7m) max 154m2 (Ø = 14m) max 314m2 (Ø = 20m) max 531m2 (Ø = 26m) max 615m2 (Ø = 28m) max 707m2 (Ø = 30m)

Radial (B) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m) max 13m2 (Ø = 4m) max 13m2 (Ø = 4m) max 13m2 (Ø = 4m)

Ø 94

Subject to change without notice.

Edition: 17 Jun. 2021 Ver. A1 Page 6/7

Wiring Diagram
L
220~240VAC
N
P2 P1N L
HBIR31

+ LN LED
LED Driver
DA DA

Max. 40pcs

DA DA

Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Detailed Push switch configurations can be set on Koolmesh app.

Switch Function Push switch Simulate sensor

Action Short press (<1 second)
* Short press has to be longer than 0.1s, or it will be invalid.
Double push
Long press (1 second)
/

Descriptions

– Turn on/off – Turn on only – Turn off only

– Recall a scene – Exit manual mode – Do nothing

– Turn on only – Turn off only – Recall a scene

– Exit manual mode – Do nothing

– Dimming – Colour tuning – Do nothing

– Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor

Additional Information / Documents
1. To learn more about detailed product features/funcvtions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions
2. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
3. Regarding precautions for PIR Sensors installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->PIR Sensors – Precautions for Product Installation and Operation

4. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors
5. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy

Subject to change without notice.

Edition: 17 Jun. 2021 Ver. A1 Page 7/7