Hytronik Hbir29-2ch Pir Standalone Motion Sensor Instruction Manual

HBIR29-2CH PIR Standalone Motion Sensor

Product Information:

Product Usage Instructions:

To use the PIR Standalone Motion Sensor (model HBIR29/2CH),
follow these steps:

1. Ensure that the operating voltage is within the range of
   220-240VAC at 50/60Hz.
2. Install the motion sensor in the desired location using the
   provided ceiling/surface mount box or any suitable accessory.
3. Select the appropriate PIR lens and blind inserts for optimal
   motion detection.
4. Connect the HBIR29/2CH to the power supply.
5. Download the smartphone app “Koolmesh Pro” from the App Store
   or Google Play Store, depending on your device’s operating system
   (iOS or Android).
6. Launch the app and follow the on-screen instructions to create
   an account and set up your project.
7. Use the app’s quick setup mode or advanced setup mode to
   configure the motion sensor according to your requirements.
8. If needed, use bulk commissioning to copy and paste settings
   for multiple devices.
9. Utilize the web app/platform (www.iot.koolmesh.com) for project
   deployment and data analysis.
10. Manage permission levels via authority management to control
    access to the motion sensor’s settings and data.
11. For on-site configuration, use the Koolmesh Pro app
    specifically designed for iPad.
12. Share the network settings with other devices via QR code or
    keycode.
13. Use the floorplan feature to simplify project planning and
    visualize the placement of luminaires.
14. Take advantage of interoperability with other Hytronik
    Bluetooth products for enhanced functionality.
15. Replace devices easily with the one-key device replacement
    feature.
16. Check device relationships and configure master-slave setups
    quickly using the staircase function.
17. Enable compatibility with EnOcean BLE switches for additional
    control options.
18. Utilize Internet-of-Things (IoT) features for advanced
    automation and connectivity.
19. Perform device firmware updates over-the-air (OTA) to ensure
    the latest features and improvements.
20. Control the motion sensor remotely using the HBGW01 gateway
    support.
21. Access heat map and dynamic daylight harvest auto-adaptation
    features for optimized lighting control.
22. Create groups of luminaires via the mesh network for
    synchronized operation.
23. Create scenes to save and recall specific lighting
    configurations.
24. Take advantage of the dusk/dawn photocell (Twilight function)
    for automatic lighting adjustments based on ambient light
    levels.
25. Enable tri-level control for different lighting levels based on
    occupancy.
26. Implement daylight harvest functionality to maximize energy
    efficiency by utilizing natural light.
27. Utilize circadian rhythm (Human centric lighting) features for
    promoting well-being and productivity.
28. Configure detailed motion sensor settings to fine-tune its
    behavior.
29. Create schedules and use the astro timer feature to automate
    lighting based on sunrise and sunset times.
30. Ensure power-on status memory against power loss to maintain
    desired settings after power interruptions.
31. Perform offline commissioning for convenient setup and
    configuration without an active internet connection.

PIR Standalone Motion Sensor with

5.0 SIG Mesh

HBIR29/2CH HBIR29/2CH/R HBIR29/2CH/W

Low-bay

Reinforced Low-bay Wide range Low-bay

HBIR29/2CH/H HBIR29/2CH/RH

RED

High-bay

Reinforced High-bay

Product Description

HBIR29/2CH is Bluetooth PIR standalone motion sensors with two

independent channel outputs. One is DALI channel output (50mA DALI

power supply built in), which can control up to 25 LED drivers. The other

is voltage-free contact, which is NC (normally closed contact). It is ideal

for typical indoor applications such as office, classroom, healthcare and

other commercial areas. With Bluetooth wireless mesh networking, it

makes communication between luminaires much easier without

time-consuming hardwiring, which eventually saves costs for projects

(especially for retrofit upgrade projects!). Meanwhile, simple device setup

and commissioning can be done via

app.

HBIR29/2CH

HBIR29/2CH/R HBIR29/2CH/W

HBIR29/2CH/H

HBIR29/2CH/RH (3-pyro)

App Features

Quick setup mode & advanced setup mode

Bulk commissioning (copy and paste settings)

Web app/platform for project deployment & data analysis

Different permission levels via authority management

Koolmesh Pro app on iPad for on-site configuration

Network sharing via QR code or keycode

Floorplan feature to simplify project planning

Interoperability with Hytronik Bluetooth product portfolio

D A L I coming soon One-key device replacement Device social relations check Staircase function for quick master & slave setup

Compatible with EnOcean BLE switches Internet-of-Things (IoT) featured Device firmware update over-the-air (OTA) Continuous development in progress…

Remote control via gateway support HBGW01

Heat map Dynamic daylight harvest auto-adaptation Grouping luminaires via mesh network Scenes Dusk/Dawn photocell (Twilight function) Tri-level control Daylight harvest Circadian rhythm (Human centric lighting) Push switch configuration Detailed motion sensor settings Schedule Astro timer (sunrise and sunset) Power-on status (memory against power loss) Offline commissioning

Hardware Features
50mA DALI broadcast output
Support to control DT8 LED drivers VFC: Volt-free Contact/Dry Contact ON/OFF relay switch: – 24VDC@2A – 250VAC@2A NC contact 2 Push inputs for flexible manual control Ceiling/Surface mount box available as accessory Various PIR lens and blind inserts options User-friendly design for installation High bay version available (up to 15m in height) 5-year warranty

Subject to change without notice.

Edition: 19 Apri. 2022 Ver. A0 Page 1/9

5.0 SIG mesh

iOS

Android

for iOS

for Android

Smartphone app for both iOS & Android platform

for iPad Koolmesh Pro app for iPad
Web for Web
Web app/platform: www.iot.koolmesh.com

Fully support EnOcean self-powered switch module PTM215B (HBES01/W & HBES01/B)

Technical Specifications

Bluetooth Transceiver Operation frequency Transmission power Range (Typical indoor) Protocol

2.4 GHz – 2.483 GHz 4 dBm 10~30m
5.0 SIG Mesh

Input & Output Characteristics

Operating voltage

220_240VAC 50/60Hz

Load ratings Warming-up

Channel 1: Max. 25 devices, 50mA Channel 2: 24VDC@2A,250VAC@2A
20s

Sensor Data Sensor Model HBIR29/2CH
HBIR29/2CH/R HBIR29/2CH/W HBIR29/2CH/H
HBIR29/2CH/RH Detection angle

PIR detection
Installation Height : 6m Detection Range(Ø) :9m
Installation Height : 6m Detection Range(Ø) :10m
Installation Height : 6m Detection Range(Ø) :18m
Installation height15m (forklift) 12m (person)
Detection range (Ø)24m
Installation height20m (forklift) 12m (person)
Detection range (Ø)40m
360O

Safety & EMC EMC standard (EMC) Safety standard (LVD)
RED Certification

EN55015, EN61000, EN61547
EN60669-1, EN60669-2-1 AS/NZS60669-1/-2-1
EN300328, EN301489-1/-17 CB, CE, EMC, RED, RCM, UKCA

Environment Operation temperature IP rating

Ta: -20OC ~ +50OC IP20

* For more details of detection range, please refer to “detection pattern” section.

Placement Guide and Typical Range for HBIR29/2CH/H & HBIR29/2CH/RH

Smart Phone to Device Range

6-10m

10m

The smart device with the App installed will have a typical range of 10m, but varies from device to device. During commissioning, the installer will need to be in range of the devices when searching for devices to add to the network.
Once the devices have been added to the network via the App, the devices will start communicating within the wireless mesh. This means that once the network is complete, all devices are accessible from the smart device when in a 20m range of a single point.

Subject to change without notice.

Edition: 19 Apri. 2022 Ver. A0 Page 2/9

Mechanical Structure & Dimensions
Ø 66~68mm
1 2
3

4

5

A

B

* Install blind as required

1

2

3

4

5

* Install lens as required

6

7

1. Ceiling (drill hole Ø 66~68mm) 2. Carefully prise off the cable clamps. 3. Make connections to the pluggable
terminal blocks. 4. Insert plug connectors and secure using
the provided cable clamps, then clip terminal covers to the base. 5. Fit detection blind (if required) and desired lens. 6. Clip fascia to body. 7. Bend back springs and insert into ceiling.
Ø 78

62.2

62.2

62.2

62.2

62.2

70.5 75.2 70.5 77.6
70.5 81 70.5 80.5 70.5 82.9

HBIR29/2CH
Wire Preparation

HBIR29/2CH/R

HBIR29/2CH/W

HBIR29/2CH/H

HBIR29/2CH/RH

0.75 – 2.5mm 7-8mm

Pluggable screw terminal. It is recommended to make connections to the terminal before fitting to the sensor.

Subject to change without notice.

Edition: 19 Apri. 2022 Ver. A0 Page 3/9

1.5 75
15.2

Big and small silicon gasket used to make IP54 degree protection when HBIR29/2CH series device mounted into HA03 housing for ceiling mount
Small silicon water-proof gasket dimension (size:mm) Big silicon water-proof gasket dimension (size:mm)

Ø 76.5 Ø 62

4.2 48.2 61.8

Detection Pattern & Optional Accessories
1. HBIR29/2CH (Low-bay)
HBIR29/2CH: Low-bay flat lens detection pattern for single person @ Ta = 20OC (Recommended ceiling mount installation height 2.5m-6m)

A: Tangential movement

B: Radial movement

Mount height

h = max.6m

h = max.6m

”
Tangential: max. 9m

# Radial: max. 4m

insensitive

sensitive

insensitive

sensitive

Optional Accessory — Ceiling/Surface Mount Box: HA03

2.5m 3m 4m 5m 6m

Tangential (A) max 50m2 (Ø = 8m) max 64m2 (Ø = 9m) max 38m2 (Ø = 7m) max 38m2 (Ø = 7m) max 38m2 (Ø = 7m)

Radial (B) max 13m2 (Ø = 4m) max 13m2 (Ø = 4m) max 13m2 (Ø = 4m) max 13m2 (Ø = 4m) max 13m2 (Ø = 4m)

Ø 94

Optional Accessory — Blind Insert for Blocking Certain Detection Angles
Valid Range

Valid Range

Blind Option 1 — Aisle Detection Subject to change without notice.

Blind Option 2 — 180O Detection Edition: 19 Apri. 2022 Ver. A0 Page 4/9

2. HBIR29/2CH/R (Reinforced Low-bay)
HBIR29/2CH/R: Low-bay convex lens detection pattern for single person @ Ta = 20OC (Recommended ceiling mount installation height 2.5m-6m)

A: Tangential movement

B: Radial movement

Mount height

2.5m

h = max.6m

h = max.6m

3m

”
Tangential: max. 10m

# Radial: max. 5m

4m 5m

insensitive

sensitive

insensitive

sensitive

6m

Optional Accessory — Ceiling/Surface Mount Box: HA03

Tangential (A) max 79m2 (Ø = 10m) max 79m2 (Ø = 10m) max 64m2 (Ø = 9m) max 50m2 (Ø = 8m) max 50m2 (Ø = 8m)

Radial (B) max 20m2 (Ø = 5m) max 20m2 (Ø = 5m) max 20m2 (Ø = 5m) max 20m2 (Ø = 5m) max 20m2 (Ø = 5m)

Ø 94

75

Optional Accessory — Blind Insert for Blocking Certain Detection Angles
Valid Range

Valid Range

Blind Option 1 — Aisle Detection

Blind Option 2 — 180O Detection

Subject to change without notice.

Edition: 19 Apri. 2022 Ver. A0 Page 5/9

3. HBIR29/2CH/W (Wide range Low-bay)
HBIR29/2CH/W: Low-bay convex lens detection pattern for single person @ Ta = 20OC (Recommended ceiling mount installation height 2.5m-6m)

A: Tangential movement B: Radial movement

Mount height

2.5m

h = max.6m

h = max.6m

3m

”
Tangential: max. 18m

# Radial: max. 6m

4m 5m

insensitive

sensitive

insensitive

sensitive

6m

Optional Accessory — Ceiling/Surface Mount Box: HA03

Tangential (A) max 254m2 (Ø = 18m) max 254m2 (Ø = 18m) max 154m2 (Ø = 14m) max 113m2 (Ø = 12m) max 79m2 (Ø = 10m)

Radial (B) max 28m2 (Ø = 6m) max 28m2 (Ø = 6m) max 28m2 (Ø = 6m) max 28m2 (Ø = 6m) max 13m2 (Ø = 4m)

Ø 94

75

Subject to change without notice.

Edition: 19 Apri. 2022 Ver. A0 Page 6/9

4. HBIR29/2CH/H (High-bay)

HBIR29/2CH/H: High-bay lens detection pattern for forklift @ Ta = 20OC (Recommended ceiling mount installation height 10m-15m)

A: Tangential movement B: Radial movement

h = max.15m ”
Tangential: max. 24m

h = max.15m
# Radial: max. 16m

insensitive

sensitive

insensitive

sensitive

Mount height 10m 11m 12m 13m 14m 15m

Tangential (A) max 380m2 (Ø = 22m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m)

Radial (B) max 201m2 (Ø = 16m) max 201m2 (Ø = 16m) max 201m2 (Ø = 16m) max 177m2 (Ø = 15m) max 133m2 (Ø = 13m) max 113m2 (Ø = 12m)

HBIR29/2CH/H: High-bay lens detection pattern for single person @ Ta = 20OC (Recommended ceiling mount installation height 2.5m-12m)

A: Tangential movement B: Radial movement

Mount height

2.5m

h = max.12m

h = max.12m

6m

”
Tangential: max. 20m

#

Radial: max. 3m

8m 10m 11m

insensitive

sensitive

insensitive

sensitive

12m

Optional Accessory — Ceiling/Surface Mount Box: HA03

Tangential (A) max 50m2 (Ø = 8m) max 104m2 (Ø = 11.5m) max 154m2 (Ø = 14m) max 227m2 (Ø = 17m) max 269m2 (Ø = 18.5m) max 314m2 (Ø = 20m)

Radial (B) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m)

Ø 94

75

Optional Accessory — Blind Insert for Blocking Certain Detection Angles
Valid Range

Valid Range

Blind Option 1 — Aisle Detection Subject to change without notice.

Blind Option 2 — 180O Detection Edition: 19 Apri. 2022 Ver. A0 Page 7/9

5. HBIR29/2CH/RH (Reinforced High-bay with 3-Pyro)
HBIR29/2CH/RH: Reinforced high-bay lens detection pattern for forklift @ Ta = 20OC (Recommended ceiling mount installation height 10m-20m)

A: Tangential movement

B: Radial movement

h = max.20m ”
Tangential: max. 40m

h = max.20m
# Radial: max. 15m

insensitive

sensitive

insensitive

sensitive

Mount height 10m 11m 12m 13m 14m 15m 20m

Tangential (A) max 346m2 (Ø = 21m) max 660m2 (Ø = 29m) max 907m2 (Ø = 34m) max 962m2 (Ø = 35m) max 1075m2 (Ø = 37m) max 1256m2 (Ø = 40m) max 707m2 (Ø = 30m)

Radial (B) max 177m2 (Ø = 15m) max 177m2 (Ø = 15m) max 154m2 (Ø = 14m) max 154m2 (Ø = 14m) max 113m2 (Ø = 12m) max 113m2 (Ø = 12m) max 113m2 (Ø = 12m)

HBIR29/2CH/RH: Reinforced high-bay lens detection pattern for single person @ Ta = 20OC (Recommended ceiling mount installation height 2.5m-12m)

A: Tangential movement B: Radial movement

h = max.12m
”
Tangential: max. 30m

h = max.12m

#

Radial: max. 4m

insensitive

sensitive

insensitive

sensitive

Mount height 2.5m 6m 8m 10m 11m 12m

Optional Accessory — Ceiling/Surface Mount Box: HA03

Tangential (A) max 38m2 (Ø = 7m) max 154m2 (Ø = 14m) max 314m2 (Ø = 20m) max 531m2 (Ø = 26m) max 615m2 (Ø = 28m) max 707m2 (Ø = 30m)

Radial (B) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m) max 7m2 (Ø = 3m) max 13m2 (Ø = 4m) max 13m2 (Ø = 4m) max 13m2 (Ø = 4m)

Ø 94

75

Subject to change without notice.

Edition: 19 Apri. 2022 Ver. A0 Page 8/9

Wiring Diagram

DA DA COM NC
HBIR29/2CH
L N P1 P2

DA DA
LED Driver
LED ­ +L N

Max. 25pcs

DA DA
LED Driver
LED ­ +L N

N L

Dimming Interface Operation Notes
Switch-Dim
The provided Switch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Detailed Push switch configurations can be set on Koolmesh app.

Switch Function Push switch Simulate sensor

Action Short press (<1 second)
* Short press has to be longer than 0.1s, or it will be invalid.
Double push
Long press (1 second)
/

Descriptions

– Turn on/off – Turn on only – Turn off only

– Recall a scene – Quit manual mode – Do nothing

– Turn on only – Turn off only – Recall a scene

– Quit manual mode – Do nothing

– Dimming – Colour tuning – Do nothing

– Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor

Additional Information / Documents
1. To learn more about detailed product features/funcvtions, please refer to www.hytronik.com/download ->knowledge ->Introduction of App Scenes and Product Functions

2. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation

3. Regarding precautions for PIR Sensors installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->PIR Sensors – Precautions for Product Installation and Operation

4. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/bluetooth technology ->Bluetooth Sensors

5. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy

Subject to change without notice.

Edition: 19 Apri. 2022 Ver. A0 Page 9/9

References

• Catalogue_Hytronik
• iot.koolmesh.com