Hukoro F15151-11i 1 Light Matte Black Wall Light With Clear Glass Shade Instruction Manual

F15151-11I 1 Light Matte Black Wall Light with Clear Glass Shade

Product Information

The product is a light fixture that comes with a mounting unit
and hardware required for installation. The package includes
screws, wire nuts, and mounting screws. The product also comes with
an exploded parts diagram for reference. The light fixture requires
a ladder, safety glasses, electrical Phillips tape, screwdriver,
flat blade screwdriver, pliers, and wire strippers for assembly.
The product may differ slightly from the parts shown in the
diagram.

Product Usage Instructions

CAUTION: Before starting assembly, ensure that
you have removed the fuse at the fuse box.

Step 1: Mounting Unit Installation

1. Unscrew the ball nuts from the mounting unit.
2. Use the mounting screws to attach the mounting unit to the
   junction box. Use a ladder and safety glasses while doing
   this.

Step 2: Electrical Connection

1. Connect the ground wire to the mounting unit using the
   preinstalled green ground screw.
2. Connect the positive, negative, and ground wires from the
   junction box to the fixture using the supplied wire nuts. Secure
   with electrical tape.
3. Use sealing tape (not included) to seal any gaps.

Step 3: Fixture Attachment

1. Attach the fixture to the mounting unit through screw holes as
   shown in the diagram.
2. Secure the fixture with screws.
3. Use caulk in the back plate and wall mounting surface to
   prevent water from entering.

Step 4: Bulb Installation

1. Install bulbs (not included) in the fixture.

By following these instructions, you can install the light
fixture safely and effectively. Please contact customer support if
you have any questions or concerns.

ASSEMBLY INSTRUCTIONS

CAUTION

³Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.

TOOLS REQUIRED

³Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by
removing the fuse at the fuse box.

Ladder

Safety glasses

Electrical Phillips

tape

screwdriver

Flat blade screwdriver

Pliers

Wire strippers

HARDWARE INCLUDED

Fixture

Mounting Unit

Screws

Mounting Screws

Wire Nuts

*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE

EXPLODED PARTS

INSTALLATION

Wire Nuts

Screws

STEP 1
Unscrew the ball nuts from the mounting unit. Use the mounting screws to attach the mounting unit to the junction box.

Mounting Unit Mounting Screws

Fixture

Bulbs (not included)
STEP 2
Make the electrical connection from the junction box to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape.

Black or Red wire (hot) from the junction box
White wire (neutral) from the junction box
Bare or Green ground wire from the junction box
*Sealing tape (not included)

Black wire from the fixture
White wire from the fixture
Ground wire from the Fixture
*Green Ground Screw

ASSEMBLY INSTRUCTIONS INSTALLATION

STEP 3
Attach the fixture to the mounting unit through screw holes as shown, and secure it with screws. NOTICE: Please use caulk in the back plate and wall mounting surface to prevent water from entering.
STEP 4
Install bulbs (not included).