2F19051-BK-S 1-Light 18-in Matte Outdoor Wall Light
Product Information
The product is a light fixture that requires assembly and
installation. It comes with the necessary hardware, including a
mounting unit, ball nuts, rubber rings, mounting screws, wire nuts,
and a fixture. The product requires additional tools such as a
ladder, safety glasses, electrical tape, pliers, wire strippers, a
Phillips screwdriver, and a flat blade screwdriver for assembly and
installation. The product also requires a junction box (not
included) for installation. The product is designed for indoor or
outdoor use and can be connected to a power source using the
provided wiring instructions.
Product Usage Instructions
Step 1: Unscrew the rubber rings and ball nuts
from the mounting unit. Use the mounting screws to attach the
mounting unit to the junction box (not included).
Step 2: Make the electrical connection from the
junction box (not included) to the fixture. Connect the ground wire
to the mounting unit using the preinstalled green ground screw.
Then, connect the positive, negative, and ground wires with the
supplied wire nuts. Secure with electrical tape.
Step 3: Attach the fixture to the mounting unit
through screw holes as shown, and secure it with rubber rings and
ball nuts. Apply caulk on the backplate and wall mounting surface
to prevent water from entering.
Step 4: Install a bulb (not included) into the
fixture.
Caution: Before beginning any work on the
product, turn off the power supply to the junction box by removing
the fuse at the fuse box. If you need further assistance, please
contact us by email at [email protected].
ASSEMBLY INSTRUCTIONS
CAUTION
³Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
³Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by
removing the fuse at the fuse box.
@ If you need further assistance, please contact us by Email: [email protected] TOOLS REQUIRED
Ladder
Safety glasses
Electrical
Phillips
tape
screwdriver
Flat blade screwdriver
Pliers
Wire strippers
HARDWARE INCLUDED
Fixture
Mounting Unit
Ball Nuts
Rubber Rings Mounting Screws Wire Nuts
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS
Junction Box (not included)
Rubber ring Ball Nuts
INSTALLATION
STEP 1
Unscrew the rubber rings and ball nuts from the mounting unit. Use the mounting screws to attach the mounting unit to the junction box (not included).
Wire Nuts
Mounting Unit
Mounting Screws
Fixture
Bulbs (not included)
STEP 2
Make the electrical connection from the junction box (not included) to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape.
Black or Red wire (hot) from the junction box
White wire (neutral) from the junction box
Bare or Green ground wire from the junction box
*Sealing tape (not included)
Black wire from the fixture
White wire from the fixture
Ground wire from the Fixture
*Green Ground Screw
ASSEMBLY INSTRUCTIONS INSTALLATION
STEP 3
Attach the fixture to the mounting unit through screw holes as shown, and secure it with rubber rings and ball nuts.
NOTICE: Please use caulk in the back plate and wall mounting surface to prevent water from entering.
*junction box (not included)
STEP 4
Install bulb (not included)
