F14521-WL Modern Vintage Style Outdoor Wall Light
Product Information:
The product is a light fixture that comes with all the necessary
hardware and tools required for installation. The package includes
a fixture, mounting unit, ball nuts, rubber rings, mounting screws,
wire nuts, and exploded parts. A junction box is not included with
the product. The product requires a ladder, safety glasses,
electrical and Phillips screwdrivers, flat blade screwdriver,
pliers, and wire strippers for installation. The product is
designed to be used with bulbs that are not included in the
package.
Product Usage Instructions:
- Begin by unscrewing the rubber rings and ball nuts from the
mounting unit. - Attach the mounting unit to the junction box using the supplied
mounting screws. - Make the electrical connection from the junction box to the
fixture. Use the preinstalled green ground screw to connect the
ground wire to the mounting unit. Next, connect the positive,
negative, and ground wires with the supplied wire nuts. Secure the
connection with electrical tape. - Attach the fixture to the mounting unit through screw holes as
shown, and secure it with rubber rings and ball nuts. Use caulk in
the back plate and wall mounting surface to prevent water from
entering. - Install bulbs (not included) in the fixture.
If you need further assistance with installation, please contact
the manufacturer at [email protected]
ASSEMBLY INSTRUCTIONS
CAUTION
³Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
³Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by
removing the fuse at the fuse box.
@ If you need further assistance, please contact us by Email: [email protected] TOOLS REQUIRED
Ladder
Safety glasses
Electrical
Phillips
tape
screwdriver
Flat blade screwdriver
Pliers
Wire strippers
HARDWARE INCLUDED
Fixture
Mounting Unit
Ball Nuts
Rubber Rings Mounting Screws Wire Nuts
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
EXPLODED PARTS
Junction Box (not included)
Rubber ring Ball Nuts
INSTALLATION
STEP 1
Unscrew the rubber rings and ball nuts from the mounting unit. Use the mounting screws to attach the mounting unit to the junction box (not included).
Wire Nuts Mounting Unit Mounting Screws
Fixture
Bulbs (not included)
STEP 2
Make the electrical connection from the junction box (not included) to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Next, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape.
Black or Red wire (hot) from the junction box
White wire (neutral) from the junction box
Bare or Green ground wire from the junction box
*Sealing tape (not included)
Black wire from the fixture
White wire from the fixture
Ground wire from the Fixture
*Green Ground Screw
ASSEMBLY INSTRUCTIONS INSTALLATION
STEP 3
Attach the fixture to the mounting unit through screw holes as shown, and secure it with rubber rings and ball nuts.
NOTICE: Please use caulk in the back plate and wall mounting surface to prevent water from entering.
*junction box (not included)
STEP 4
Install bulb (not included)
