- Test for suction at the motor duct
- Remove dirt container & filter
- Plug machine in and turn on
- Place hand over opening on machine where pre-motor foam filter sits
- If no suction, visit a BISSELL Authorized Service Center or Contact Us
- If there is suction, inspect the filters
- Dirty filters can cause damage to the motor and eventually no power if not properly maintained
- Clean debris from the pre-motor foam filter
- Remove filter from dirt cup
- Unlock filters and separate to clean
- Shake over waste container to remove debris
- After heavy use, both filters can be washed in warm water & mild dish soap
- Allow to completely dry (24 – 48 hours) before re-installing
- Filters should be replaced if torn or damaged
- Filter must be inserted securely into dirt cup before attaching to the machine to prevent blowing dust
If you continue to have suction or blowing dust issues, please visit a BISSELL Authorized Service Center or Contact Us
