- Check for suction at the motor duct
- Remove dirt container & filter
- Plug machine in and turn on
- Place hand over opening on machine where pre-motor foam filter sits
- If no suction here, Contact Us
- If there is suction, check the filters
- Dirty filters can cause damage to the motor and eventually no power if not properly maintained
- Clean debris from the pre-motor foam filter
- Remove filter from dirt cup
Unlock filters and separate to clean
Shake over waste container to remove debris
- After heavy use, both filters can be washed in warm water & mild dish soap
- Allow to completely dry (24 – 48 hours) before re-installing
- Filters should be replaced if torn or damaged
- The filter must be inserted securely into the dirt cup before attaching to the machine to prevent blowing dust
If you continue to have suction or blowing dust issues, Contact Us
