Arcora Ar6221300b Single Handle Wall Mounted Bathroom Faucet Instruction Manual

AR6221300B Single Handle Wall Mounted Bathroom Faucet

Product Information:

The Wall Mount Faucet is a durable and efficient faucet designed
for easy installation. It is compliant with California water
efficiency regulations, California Proposition 65, and the Federal
Safe Drinking Water Act. The faucet comes with a 1.2 GPM aerator
for improved water flow and is suitable for areas with low water
pressure. The finish of the faucet is extremely durable but can be
damaged by harsh abrasives or polish. It is recommended to clean
the faucet with a damp cloth and blot dry with a soft towel.

Product Usage Instructions:

1. Before beginning the installation, make sure to read all the
   instructions provided in the manual.
2. Read all warnings, care, and maintenance information.
3. If the water flow from the basin faucet is unsatisfactory due
   to low water pressure, replace the 2.2 GPM aerator with the
   provided 1.2 GPM aerator for improved water flow.
4. Ensure that the water supply is turned off before starting the
   faucet installation.
5. Apply Teflon tape in a clockwise direction on the threads of
   the center valve.
6. Install the spout (H) with the spout escutcheon (G) onto the
   center valve and tighten it with a wrench.
7. Make sure the spout (G) is engaged to the wall securely.
8. Tighten the handle escutcheon (B) by hand and ensure it is
   engaged to the wall.
9. Turn on both hot and cold water supplies.
10. Turn on the stems and flush water lines for one minute.
11. Check all connections at arrows for leaks.
12. Finish by turning off the stems until they stop.
13. Fasten the faucet securely to the wall.
14. For handle installation, place the set screw (D) onto the hex
    wrench (E) and insert it into the handle (C). Tighten the set screw
    (E) to secure the handle.
15. Insert the plug button (F) into the handle set screw hole.
16. If required, remove the aerator with the provided tool. Turn on
    both handles and run water for 15 seconds. Turn off handles and
    re-install the aerator, hand-tightening it.

WALL MOUNT FAUCET

Ø2.16″ (Ø55)

4.72″(120)

Ø2.6″ (Ø65)

inch(mm)

2″(53) 3.2″(81)

You may need

1.2GPM 4.5L/min

For easy installation of your faucet you will need:
To READ ALL the instructions completely before beginning.
To READ ALL warnings, care, and maintenanceinformation.

With 1.2 gpm are compliant with California water effi ciency regulations, Complies with California Proposition 65 and with the Federal Safe Drinking Water Act.
In areas with extremely low water pressure causing the basin faucet water flow to be unsatisfactory , replace the 2.2 gpm aerator to improve the water flow in the basin faucet.

washer 1.2gpm aeratot aeratot house

Cleaning and Care Care should be given to the cleaning of this product. Although its finish is extremely durable, It can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.

1.65″ (42)
1.1″ (28) NPT 1/2 2.83″(72)

Min.1.5″(38)

8″(202)

3×0.22″(Ø5.5)

G1/2

4.72″(120)

COLD

NPT 1/2 7″(177)
HOT

Min.8.9″(226.5) Max.10″(250)
Min.Wall Opening 1.26″(32mm) Max.Wall Opening 2″(3x52mm)

0.96″ (24.5)

Min.Wall Opening 1.8″(46mm) Max.Wall Opening 2.5″(63mm)

3.5″ (89.3)

Max. Wall Thickness 1.45″(37mm) Min. Wall Thickness 0.2″(5mm)
Finished Wall Line

Min.2″ (49.5mm) Max.2.8″ (73mm)
Face of Stud

G H

F E D
A

B C

A.Faucet Body B. Handle Escutcheon C. Handle D. Set Screw E. 3/32″ Hex Key F.Plug Button G. Spout Escutcheon H. Spout

1

HOT
2

COLD

Ensure water is turned off prior to faucet installation.

3

4

G B
H

1.Apply teflon tape in a clockwise 2.Install spout (H) with spout escutcheon (G) onto center valve. 3.Tighten spout (H) with wrench. 4.Ensure spout (G) is engaged to wall.
5 F E
D
C

Tighten handle escutcheon (B) with hand. ensure handle escutcheon (B) is engaged to wall.
6

ON

1.Turn on hot and cold water

supplies ,

2.Turn on stems ,and flush

water lines for one minute.

3.Check all connections at

arrows for leaks.

HOT

COLD

4.Finish, turn stems off until

they stop.

5.Fasten the faucet to the

wall.

1. Place Set Screw (D) onto Hex Wrench (E) and insert into handle (C). 2. Tighten Set Screw (E). 3.Insert Plug Button (F) into handle set screw hole.

1. Loosen and remove aerator with tool. 2. Turn on both handles and run water for 15 seconds. 3. Turn off handles. 4. Re-install aerator with tool and hand tighten.