BTC8008FG SKI Double Cross Handle Wall Mount Waterfall Bathroom Sink Faucet
Product Information: Wall-Mount Faucet
The Wall-Mount Faucet is a high-quality faucet designed for easy
installation on a wall. It comes with a rough-in valve and all the
necessary hardware for installation. The faucet is compatible with
existing water lines and is designed to provide a watertight seal
for efficient and reliable operation. The faucet features a spout
and two handles for hot and cold water control. It also includes
decorative escutcheons for a stylish finish. The faucet is made of
durable materials to ensure long-lasting performance.
Product Usage Instructions: Wall-Mount Faucet Installation
- Before starting the installation, gather all the required tools
and materials, including plumber’s tape, drill, thread sealant,
tape measure, level, hex wrench, and a 14mm socket wrench. - Shut off the main water supply where the new faucet is being
installed. - Prepare for installation by installing wood blocking between
the two studs where the faucet will mount. The valve should be
installed 2″ behind the finished wall. Take into consideration the
thickness of your finished wall materials. - Mount the rough-in valve into its prepared location using the
provided hardware. Ensure that the valve is mounted completely
level. - Attach your existing water lines to the valve. Apply thread
sealant or plumber’s tape to the threaded connection for a
watertight seal. - Once your finished wall has been completed, remove the
protective plastic sleeves from the valve. Remove the plug from the
spout outlet using a 14mm socket wrench. - Attach the spout to the valve by twisting it into the middle
valve outlet. Apply plumber’s tape or a small amount of thread
sealant to the threads before attaching. - Slide the decorative escutcheons onto the spout and each
handle. - Attach the hot and cold handles by sliding them onto the left
and right stems. Secure each handle by tightening the set screw on
the bottom of the handle using the provided hex wrench. - When the installation is complete, turn on the main water
supply. Use the provided tool to remove the aerator from the spout
and turn the water on to clear any dust or loose sediment. Allow
the water to flow through the spout for approximately 60 seconds
and verify that hot and cold water are running properly. Reattach
the aerator once testing is complete.
WALL-MOUNT FAUCET
GETTING STARTED
Ensure that you have gathered all of the required materials that are needed for the installation. Shut off the main water supply where the new faucet is being installed.
TOOLS AND MATERIALS:
Plumber’s Tape*
Drill*
Thread Sealant*
Tape Measure*
Level*
Hex Wrench
14mm Socket Wrench*
*not included
Wall-Mount Faucet Installation Instructions
WALL-MOUNT FAUCET
INSTALLATION
1. Prepare for installation by installing wood blocking between the two studs where the faucet will mount. The valve should be installed 2″ behind the finished wall.
Important: Take into consideration the thickness of your finished wall materials, such as a tile backsplash. If your valve is installed too far behind your finished wall, you may be left with insufficient clearance to attach the spout and handles.
2. Mount the rough-in valve into its prepared location. Attach the valve body using the provided hardware. Use a level to ensure that the valve is mounted completely level.
Important: Leave the protective plastic sleeves on the valve until your finished wall is completed.
Wood blocking between studs
3. Attach your existing water lines to the valve. Apply
thread sealant or plumber’s tape to the threaded connection to ensure a watertight seal.
Protective covers enlarged view
Cold Water Hot Water
Wall-Mount Faucet Installation Instructions
WALL-MOUNT FAUCET
4. Once your finished wall has been completed, remove the protective plastic sleeves from the valve. Remove the plug from the spout outlet using a 14mm socket wrench.
6. Attach the spout to the valve by twisting it into the middle valve outlet. Apply plumber’s tape or a small
amount of thread sealant to the threads before attaching.
5. Slide the decorative escutcheons onto the spout and each handle.
Wall-Mount Faucet Installation Instructions
WALL-MOUNT FAUCET
7. Attach the hot and cold handles by sliding them onto the left and right stems. Secure each handle by tightening the set screw on the bottom of the handle, using the provided hex wrench.
8. When your installation is complete, turn on the main water supply. Use the provided tool to remove the aerator from the spout. Turn the water on to allow any dust or loose sediment to clear the system. Allow the water to flow through the spout for approximately 60 seconds, and verify that hot and cold water are running properly. Reattach the aerator once testing is complete.
Wall-Mount Faucet Installation Instructions
