WK0608 Wall Mounted Pot Filler with Double Handle
Product Information
The Faucet is a wall-mounted system designed for water supply.
It is essential to follow the provided instructions for proper
installation and usage.
Preparation Before Installation
- This Faucet system needs to be installed to the wall. Before
installation, ensure that all dimensions match the
instructions. - Clean the impurities and sludge from the hose before assembling
to prevent leakage. - The water pressure should be within the range of 0.1Mpa-1.0Mpa
for proper functioning. - Before starting the installation, turn off the water
supply.
Product Dimensions
Installation drawing:
Product Usage Instructions
- A universal 4-min pre-installed water pipe is required for
installation. - Each pipe should undergo a pressure test to ensure there are no
leaks. - Use a ring leakage-proof raw material belt.
- Turn the pipe into the tube and tighten it securely.
- Garnish with a cup to enhance the appearance.
- Once all steps are completed, the installation is considered
complete.
Faucet
Instruction Manual
Preparation Before Installation
1.This Faucet system needs to be installed to the wall, please make sure check all the size according to the instruction before installation
2.Clean the impurity and sludge in the hose before assembling to avoid leaking 3.Proper Water pressure should between 0.1Mpa-1.0Mpa 4.Turn off the water supply before installation
Product Dimensions
Installation drawing
10.63″
6.3″
G½
3.15″
1.A universal 4-min pre-installed water pipe is required
2. Each pipes shall be pressure tested to ensure no leakage
Installation drawing
Installation drawing
3. Ring leakage-proof raw material belt
5. Turn into the tube and tighten it
4. Garnish with a cup
6.Installation complete
