BTC80199LSJ Double Cross Handle Single-Hole Gold Tranditional Bathroom Faucet
Product Information
The product is a single hole double handle basin faucet. It
comes with standard accessories which include:
| No | Parts Name | Amount |
|---|---|---|
| 1 | Faucet body | 1 |
| 2 | Dental tubes | 1 |
| 3 | Supply hose | 2 |
| 4 | Installation instructions | 1 |
Product Usage Instructions
Installation Notes:
- Before installing the faucet, clean the impurities in the
pipeline to avoid blocking the faucet. - The faucet has passed the inspection by the manufacturer when
leaving the factory. Users are not allowed to disassemble it
without authorization. - After installation, please check whether each connection part
of the faucet has leakage and whether the connection is tight. - Please install the filter screen in the water inlet pipe during
installation, and the water inlet hose shall not be twisted to
avoid affecting the use.
Flushing Pipeline:
Hose must not be twisted.
Installation Steps:
- Cleaning of water supply pipeline: Before installation, be sure
to clean the sundries, sand, and other foreign matters in the
pipeline to avoid blockage and damage to the faucet. - As shown in Figure 1: first confirm that there are 35
installation holes, second place the main body on the basin, then
install the dental tube as shown by the arrow on the figure, and
finally put another hose on it. - After installing the hose, as shown in Figure 2.
- As shown in Figure 3: screw the braided hose onto the angle
valve and tighten it with a wrench. - After installation, test the water and check whether all
connecting parts are sealed.
Instructions:
- Turn the hot and cold hand wheel inward to open, and the
maximum opening angle is 90 degrees. - Schematic diagram of disassembly and replacement of hot and
cold handwheel.
Installation Notes
1. Before installing the faucet, clean the impurities in the pipeline to avoid blocking the faucet;
2. The faucet has passed the inspection by the manufacturer when leaving the factory. Users are not allowed to disassemble it without authorization;
3. After installation, please check whether each connection part of the faucet has leakage and whether the connection is tight;
4. Please install the filter screen in the water inlet pipe during installation, and the water inlet hose shall not be twisted to avoid affecting the use;
5. When it is used when the environment is lower than 0 °, the water stored in the pipeline and faucet shall be drained to prevent icing;
6. Temperature range of water used: 4 °~70 °
Flushing pipeline
Hose must not be twisted
Installation Instructions
List of standard accessories:
No
Parts Name
Amount
1
Faucet body
1
1
2
Dental tubes
1
3
Supply hose
2
4 Installation instructions
1
2
3
4
Installation Steps:
1. Cleaning of water supply pipeline; Before installation, be sure to clean the sundries, sand and other foreign matters in the pipeline to avoid blockage and damage to the faucet; The specific installation method is shown in the figure:
Ø1.38″
Installation holes
2. As shown in Figure 1: first confirm that there are 35 installation holes, second place the main body on the basin, then install the dental tube as shown by the arrow on the figure, and finally put another hose on it.
1
2
3. After installing the hose, as shown in Figure 2.
4.As shown in Figure 3: screw the braided hose onto the angle valve and tighten it with a wrench.
6. After installation, test the water and check whether all connecting parts are sealed.
Angle valve
Instructions
1. Turn the hot and cold hand wheel inward to open, and the maximum opening angle is 90 degrees.
3
4
2. Schematic diagram of disassembly and replacement of hot and cold handwheel.
Opening direction
Hot
Opening direction
Cold
Valve core replacement
Material Code:
4.88″
6.43″ Ø2.4″
10° M32x1.5
4.21″
6.02″ 109°
No
5 4 3 2 1
Mark
Materials
Surface treatment
Date
Modification content
Treatment process
unmarked thickness (Inch)
unmarked fillet (Inch)
weight (g) Drawing Proofreading
Remarks
View
Review Approval
modification reason
total sheet Page
Scale 1:1
Product drawing no.
product name
single hole double handle basin faucet
Version
A0
Applicable
product
801999-00
