BTC80199FG SUNRASE Double Cross Handle Low Arc Single-Hole Classic Bathroom Faucet for Sink
Product Information:
- The product is a single hole double handle basin faucet.
- It comes with a faucet body, dental tubes, supply hoses, and
installation instructions. - The faucet has passed inspection by the manufacturer and should
not be disassembled without authorization. - During installation, a filter screen should be installed in the
water inlet pipe to prevent blockages. - The water inlet hose should not be twisted to ensure proper
functioning. - The hot and cold hand wheels can be turned inward to open the
water flow, with a maximum opening angle of 90 degrees.
Product Usage Instructions:
- Clean the impurities in the pipeline before installing the
faucet to prevent blockages. - Ensure all connection parts of the faucet are tight and check
for leaks after installation. - Install the filter screen in the water inlet pipe during
installation, making sure the water inlet hose is not twisted. - Follow the installation steps below:
- Clean the water supply pipeline to remove any debris or foreign
matter. - Confirm the presence of 35 installation holes and place the
faucet body on the basin. - Install the dental tube as indicated by the arrow in Figure 1,
and then attach the hose. - Tighten the braided hose onto the angle valve using a wrench,
as shown in Figure 3. - Test the water flow and check for any leaks in the connecting
parts.
- Clean the water supply pipeline to remove any debris or foreign
Note: Refer to the provided schematic diagrams and instructions
for disassembly, replacement of the hot and cold handwheel, and
valve core replacement.
Installation Notes
1. Before installing the faucet, clean the impurities in the pipeline to avoid blocking the faucet;
2. The faucet has passed the inspection by the manufacturer when leaving the factory. Users are not allowed to disassemble it without authorization;
3. After installation, please check whether each connection part of the faucet has leakage and whether the connection is tight;
4. Please install the filter screen in the water inlet pipe during installation, and the water inlet hose shall not be twisted to avoid affecting the use;
5. When it is used when the environment is lower than 0 °, the water stored in the pipeline and faucet shall be drained to prevent icing;
6. Temperature range of water used: 4 °~70 °
Flushing pipeline
Hose must not be twisted
Installation Instructions
List of standard accessories:
No
Parts Name
Amount
1
Faucet body
1
1
2
Dental tubes
1
3
Supply hose
2
4 Installation instructions
1
2
3
4
Installation Steps:
1. Cleaning of water supply pipeline; Before installation, be sure to clean the sundries, sand and other foreign matters in the pipeline to avoid blockage and damage to the faucet; The specific installation method is shown in the figure:
Ø1.38″
Installation holes
2. As shown in Figure 1: first confirm that there are 35 installation holes, second place the main body on the basin, then install the dental tube as shown by the arrow on the figure, and finally put another hose on it.
1
2
3. After installing the hose, as shown in Figure 2.
4.As shown in Figure 3: screw the braided hose onto the angle valve and tighten it with a wrench.
6. After installation, test the water and check whether all connecting parts are sealed.
Angle valve
Instructions
1. Turn the hot and cold hand wheel inward to open, and the maximum opening angle is 90 degrees.
3
4
2. Schematic diagram of disassembly and replacement of hot and cold handwheel.
Opening direction
Hot
Opening direction
Cold
Valve core replacement
Material Code:
4.88″
6.43″ Ø2.4″
10° M32x1.5
4.21″
6.02″ 109°
No
5 4 3 2 1
Mark
Materials
Surface treatment
Date
Modification content
Treatment process
unmarked thickness (Inch)
unmarked fillet (Inch)
weight (g) Drawing Proofreading
Remarks
View
Review Approval
modification reason
total sheet Page
Scale 1:1
Product drawing no.
product name
single hole double handle basin faucet
Version
A0
Applicable
product
801999-00
