BTC28054BG 4 Inch Centerset Double-Handle High Arc Bathroom Sink Faucet
Product Information
The product is a spout installation kit for sinks. It includes a
gasket, spout, bracket, nut, handles, washers, threaded rings,
quick connects, and a receiving tube. The kit also requires a 1/2
FIP hose and rags for installation.
Product Usage Instructions
- Fit the gasket onto the underside of the spout.
- Insert the spout through the sink opening.
- Slide the bracket and washer onto the stud.
- Thread the nut onto the stud and tighten.
- Alternatively, if the sink is uneven, use silicone under the
gasket before securing the spout with the bracket and nut. - Loosely attach each handle with a washer and a threaded ring.
Ensure the handles are in the OFF position. - Align the handles as shown.
- Align tabs (1) and tabs (2) on quick connects (3).
- Push the quick connects firmly upward and snap them onto the
receiving tube tab (1). - Pull down moderately to ensure each connection has been
made. - Connect the product to the water supplies.
- Turn on the water supplies.
- Check all connections for leaks.
Installation Guide
1 Fit the gasket onto the underside of the spout. Insert the spout through the sink opening. Slide the bracket and washer onto the stud Thread the nut onto the stud and tighten.
1/2″ FIP Hose
Rags
or
1 Place spout with gasket through mounting hole in sink. Secure spout with bracket and nut. Note: If sink is uneven, use silicone under the gasket.
2 Loosely attach each handle with a washer and a threaded ring. Ensure the handles are in the OFF position Align the handles as shown.
3 Align tabs (1) and tabs (2) on quick connects (3). Push
quick connects firmly upward and snap onto receiving tube tab (1). Pull down moderately to ensure each connection has been made.
4 Connect To Water Supplies.
1
1 3 1
3 3
2
Hot Caliente Eau Chaude
Cold Fría Eau Froides
5 Turn on the water supplies.Check all connections for leaks.
