CS 2605 Leeds Small Round Sconce
Product Information
Product Name: Leeds Small Round Sconce
Item Number: CS 2605
Manufacturer: N/A
Product Description: The Leeds Small Round Sconce is a light
fixture that provides illumination for indoor spaces. The fixture
requires a bulb, which is not included in the package. It is
important to install the sconce in accordance with local
installation codes and by a person familiar with its construction
and operation.
Caution: Inspect the item and its contents carefully before
installation. Do not install if any damage or defect is found.
Retain all packaging material until installation is complete and
approved.
Product Usage Instructions
- Carefully remove all parts from the box and place them on a
clean, soft surface. - Using a Phillips screwdriver, remove the screws (D) to detach
the mounting plate (B) from the fixture (E). - Install the mounting plate (B) to the junction box and secure
it with the provided mounting screws (C). - Wrap the fixture’s ground wire (bare copper) around the green
grounding screw on the junction box and tighten it securely. - Connect the fixture’s wires to the corresponding wires in the
junction box according to the local electrical code. Use wire
connectors to secure the connections. - If applicable, attach any decorative elements or shades to the
fixture. - Insert a compatible bulb into the fixture, following the
manufacturer’s instructions. - Turn on the power and test the fixture to ensure it is
functioning properly.
Care Instructions
Clean the Leeds Small Round Sconce only with a soft dry cloth or
feather duster. Do not use abrasive or chemical agents that may
damage the fixture.
ASSEMBLY INSTRUCTIONS
B
AC
Diagram 1
D
E
Bulb not included
Leeds Small Round Sconce
Item # CS 2605
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED):
Phillips Screwdriver
Slotted Screwdriver
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Remove mounting plate (B) from fixture (E) by removing screws (D). 3. Install mounting plate (B) to the junction box and secure with
mounting screws (C). 4. Wrap fixture ground wire (bare copper) around the green grounding
screw (see diagram 1). Tighten. Continue fixture ground wire and connect to supply ground wire (usually green or bare copper) using wire nut (A). NOTE: It is imperative that the fixture is grounded. 5. Connect fixture neutral wire (white) to the supply neutral wire (usually white) using wire nut (A). 6. Connect fixture hot wire (black) to the supply hot wire (usually black) using wire nut (A). CAUTION: Do not reverse the hot and neutral connections. 7. Make sure all wire connections are tight, then carefully tuck into the junction box. 8. Install fixture (E) to mounting plate (B) and secure with screws (D). 9. Install light bulb into the socket.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
