S 2212 French Double Library Sconce
Product Information
Product Name: French Double Library Sconce
Item Number: S 2212
Care Instructions: Clean only with a soft dry cloth or feather
duster. Do not use abrasive or chemical agents.
Important Notice:
- This light fixture should be installed in accordance with all
applicable, local installation codes. - The installation should be done by a person familiar with the
construction and operation of the fixture, as well as the hazards
involved. - Inspect the item and contents carefully. If any damage or
defect is found, do not install. - Retain all packaging material until installation is complete
and approved.
Product Usage Instructions
- Carefully remove all parts from the box.
- Remove the mounting plate (B) from the fixture body (D) by
loosening the side screws (E). - Affix mounting plate (B) to the outlet box and secure with
mounting screws (C). - Connect the hot wire (BLACK) from the fixture to the hot wire
from the electrical supply. - Connect the neutral wire (WHITE) from the fixture to the
neutral wire from the electrical supply. - Connect the ground wire (GREEN or BARE) from the fixture to the
grounding wire or screw in the outlet box. - Tighten all wire connections securely using wire nuts or other
appropriate connectors. - Attach the fixture body (D) to the mounting plate (B) using the
side screws (E). - Ensure that all connections are properly insulated and
secured. - Install light bulbs according to their specifications.
- Turn on the electrical supply and test the fixture.
- If the fixture is working properly, complete the installation
by securing any decorative elements and adjusting the position of
the sconce as desired.
ASSEMBLY INSTRUCTIONS
French Double Library Sconce Item # S 2212
NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
1. Carefully remove all parts from the box. 2. Remove the mounting plate (B) from the fixture body (D) by loosening
the side screws (E). 3. Affix mounting plate (B) to the outlet box and secure with mounting
screws (C). 4. Connect the hot wire (BLACK) from the fixture to the hot wire from the
outlet box (usually BLACK). Fasten them together with a plastic wire connector (A) provided and wrap the connection with electrical tape. 5. Repeat this procedure for the neutral wire (WHITE) from the fixture to the wire from the outlet box (usually WHITE). DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY WILL BE COMPROMISED. 6. Connect ground wire from the fixture (bare copper) to ground wire from the outlet box (usually green or copper in color). IT IS IMPERATIVE THAT THIS FIXTURE BE GROUNDED. 7. Attach the fixture body (D) to the mounting plate (B) and secure with side screws (E). 8. Insert bulb (not included) into the socket. 9. Installation is complete, turn on power at fuse or circuit breaker.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
