KS 3630 Carmilla Medium Table Lamp
Product Information
Product Name: Carmilla Medium Table Lamp
Item Number: KS 3630
Package Contents: Lamp base, socket ring, harp, finial, shade,
light bulb (not included), protective cover
Product Dimensions: Not specified in the user manual
Product Weight: Not specified in the user manual
Product Usage Instructions
- Before starting the assembly process, ensure that you have the
necessary tools: scissors. - Carefully remove all parts from the box and place them on a
clean, soft surface. - Take the socket ring (D) and detach it from the socket
(E). - Attach the harp (C) to the socket (E) and secure it with the
socket ring (D). - Remove the finial (A) from the harp (C).
- Unpack the shade (B) and install it onto the harp (C) using the
finial (A). If the shade has additional packaging, carefully cut it
off from the interior of the shade to avoid damages. - Insert a light bulb into the socket.
- Remove the protective cover (F) from the plug.
- Plug the lamp into an electrical outlet.
- Test the fixture to ensure proper functioning.
Care Instructions
To clean the lamp, use only a soft dry cloth or feather duster.
Avoid using abrasive or chemical agents as they may damage the
lamp’s surface.
Note: This light fixture should be installed by a person
familiar with its construction and operation, as well as the
applicable local installation codes and hazards involved. Inspect
the item and its contents carefully before installation. If any
damage or defect is found, do not proceed with the installation.
Retain all packaging material until the installation is complete
and approved.
ASSEMBLY INSTRUCTIONS
A B
C Bulb not included D E
F
Carmilla Medium Table Lamp Item # KS 3630
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Remove socket ring (D) from socket (E). 3. Install harp (C) to socket (E) and secure with socket ring (D). 4. Remove finial (A) from harp (C). 5. Remove shade (B) from packaging and install to harp (C) using
finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 6. Install light bulb into the socket. 7. Remove protective cover (F) from plug. 8. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
