KW3932 Onda Medium Table Lamp
Product Information
The Onda Medium Table Lamp is a stylish and functional lighting
fixture designed to enhance any room. It comes with the following
components:
- A – Diffuser
- B – Finial
- C – Shade
- D – Harp
- E – Saddle
- F – Protective Cover
The lamp is designed to be installed in accordance with local
installation codes by someone familiar with its construction and
operation. Please inspect the item and contents carefully before
installation. If any damage or defect is found, do not proceed with
installation. Retain all packaging material until installation is
complete and approved.
Tools Required (Not Included)
Scissors
Product Usage Instructions
- Open the box and carefully remove all parts from the packaging.
Place them on a clean, soft surface. - Install the harp (D) by squeezing it together and inserting it
into the top of the saddle (E). - Remove the finial (B) from the harp (D).
- Take the shade (C) out of its packaging and install it onto the
harp (D) using the finial (B). If the shade has additional
packaging, carefully cut it off from the interior to avoid
damages. - Install a light bulb into the socket.
- Place the diffuser (A) on top of the shade (C).
- Remove the protective cover (F) from the plug.
- Plug the lamp into an electrical outlet and test the
fixture.
Care Instructions
To clean the lamp, use only a soft dry cloth or feather duster.
Do not use abrasive or chemical agents.
Unpacking Notice
Please follow the instructions below to avoid possible damages
caused by improper removal of the lamp:
- Open the box and remove the top layer of packaging.
- Carefully lift the body of the lamp by the fabric handles while
supporting the other end until it is clear of packaging. - Place the lamp upright on a clean, soft surface.
ASSEMBLY INSTRUCTIONS
A B C (Packaged separately)
D Bulb not included E
F
Onda Medium Table Lamp
Item # KW3932
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Install harp (D) by squeezing together and inserting into the top of
saddle (E). 3. Remove finial (B) from harp (D). 4. Remove shade (C) from packaging and install to harp (D) using
finial (B). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 5. Install light bulb into the socket. 6. Place diffuser (A) on the top of shade (C). 7. Remove protective cover (F) from plug. 8. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
LED
UNPACKING NOTICE
Onda Medium Table Lamp
Item # KW3932
NOTICE: Please follow instructions below to avoid possible damages caused by improper removal.
1. Open box and remove top layer of packaging. 2. Carefully lift body by fabric handles while supporting other end of body
until clear of packaging. Place upright on a clean, soft surface.
