KW 3675 Pari Petite Square Table Lamp
Product Information
Product Name: Pari Petite Square Table Lamp
Item Number: KW 3675
Product Usage Instructions
- Carefully remove all parts from the box and place them on a
clean, soft surface. - Remove the socket ring (C) from the socket (D).
- Take the shade (B) out of the packaging and install it onto the
socket (D) by securing it with the socket ring (C). If the shade
has additional packaging, carefully cut it off from the interior of
the shade to avoid damages. - Install a light bulb into the socket.
- Place the diffuser (A) onto the top of the shade (B).
- Remove the protective plug cover (E) from the plug.
- Plug the lamp into an electrical outlet.
- Test the fixture to ensure it is working properly.
Care Instructions
Clean the lamp only with a soft dry cloth or feather duster. Do
not use abrasive or chemical agents.
ASSEMBLY INSTRUCTIONS
A Bulb not included B C
D E
Pari Petite Square Table Lamp Item # KW 3675
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Remove socket ring (C) from socket (D). 3. Remove shade (B) from packaging and install to socket (D) by
securing with socket ring (C). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 4. Install light bulb into socket. 5. Place diffuser (A) onto the top of shade (B). 6. Remove protective plug cover (E) from the plug. 7. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
