JN 3608 Andreas Medium Table Lamp
Product Information:
Product Name: Andreas Medium Table Lamp
Item Number: JN 3608
Product Description: The Andreas Medium Table
Lamp is a stylish and functional lighting fixture that adds
ambiance to any room. It requires a light bulb (not included) for
operation.
Installation Requirements: This light fixture
should be installed in accordance with all applicable, local
installation codes, and by a person familiar with the construction
and operation of it, as well as the hazards involved. Inspect the
item and contents carefully before installation. If any damage or
defect is found, do not install. Retain all packaging material
until installation is complete and approved.
Tools Required (Not Included):
- Scissors
Product Usage Instructions:
- Carefully remove all parts from the box and place them on a
clean, soft surface. - Install the harp (C) by squeezing it together and inserting it
into the top of the saddle (D). - Remove the finial (A) from the harp (C).
- Remove the shade (B) from its packaging and install it to the
harp (C) using the finial (A). If the shade has additional
packaging, carefully cut it off from the interior of the shade to
avoid damages. - Install a light bulb into the socket.
- Remove the protective cover (E) from the plug.
- Plug the lamp into an electrical outlet and test the
fixture.
Care Instructions:
Clean the lamp only with a soft dry cloth or feather duster. Do
not use abrasive or chemical agents.
Note: This product is listed and approved for
use in the United States (US).
ASSEMBLY INSTRUCTIONS
A B (Packaged separately)
C Bulb not included D
E
Andreas Medium Table Lamp Item # JN 3608
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Install harp (C) by squeezing together and inserting into top of
saddle (D). 3. Remove finial (A) from harp (C). 4. Remove shade (B) from packaging and install to harp (C) using
finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 5. Install light bulb into the socket. 6. Remove protective cover (E) from the plug. 7. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
