CHA8694 Kang Jug Large Table Lamp
Product Information
Product Name: Kang Jug Large Table Lamp
Item Number: CHA 8694
This product is a table lamp that requires assembly and
installation. It is designed to provide lighting for indoor spaces.
The lamp comes with multiple parts including a harp, shade, finial,
and protective cover.
It is important to note that this light fixture should be
installed in accordance with all applicable local installation
codes. Installation should be done by a person familiar with the
construction and operation of the lamp as well as the hazards
involved. Before installation, carefully inspect the item and its
contents for any damage or defects. If any issues are found, do not
proceed with the installation. Retain all packaging material until
the installation is complete and approved.
It is recommended to have scissors as a tool for the assembly
process, which are not included with the product.
Product Usage Instructions
- Carefully remove all parts from the box and place them on a
clean, soft surface. - Install the harp (C) by squeezing it together and inserting it
into the top of the saddle (D). - Remove the finial (A) from the harp (C).
- Remove the shade (B) from its packaging and install it onto the
harp (C) using the finial (A). - If the shade has additional packaging, carefully cut it off
from the interior of the shade to avoid damages. - Install a light bulb into the socket.
- Remove the protective cover (E) from the plug.
- Plug the lamp into an electrical outlet.
- Test the fixture to ensure it is functioning properly.
Care Instructions
To clean the lamp, use only a soft dry cloth or a feather
duster. Do not use abrasive or chemical agents, as they may damage
the lamp’s surface.
Please ensure that this product is used in accordance with the
provided instructions and safety guidelines.
This product is listed for use in the United States.
ASSEMBLY INSTRUCTIONS
A
B (Packaged separately) C Bulb not included D
E
Kang Jug Large Table Lamp Item # CHA 8694
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Install harp (C) by squeezing together and inserting into the top of
saddle (D). 3. Remove finial (A) from harp (C). 4. Remove shade (B) from packaging and install to harp (C) using
finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 5. Install light bulb into the socket. 6. Remove protective cover (E) from plug. 7. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
