CHA 8924 Balustrade Table Lamp
Product Information
| Product Name | Balustrade Table Lamp |
|---|---|
| Item Number | CHA 8924 |
| Usage | Indoor table lamp |
| Installation Requirements | This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. |
| Inspection | Inspect the item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved. |
| Care Instructions | Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents. |
Product Usage Instructions
- Carefully remove all parts from the box.
- Install harp (C) onto the saddle (D).
- Place shade (B) onto the harp (C) and secure with finial
(A). - Insert a bulb (not included) into the socket.
- Remove the protective plug cover (E) from the plug.
- Plug the lamp into a proper electrical outlet.
- Test the fixture to ensure it is working properly.
- Installation is complete.
ASSEMBLY INSTRUCTIONS
Balustrade Table Lamp
Item # CHA 8924
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
1. Carefully remove all parts from the box. 2. Install harp (C) onto the saddle (D). 3. Place shade (B) to the harp (C) and secure with finial (A). 4. Insert bulb (not included) into the socket. 5. Remove protective plug cover (E) from the plug. 6. Plug into a proper electrical outlet and test the fixture. 7. Installation is complete.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
