KW 3024 Alta Table Lamp
Product Information
Product Name: Alta Table Lamp
Item Number: KW 3024
Certification: Listed by Intertek
Product Usage Instructions
- Inspect the item carefully before attempting to install. If
there is any damage or obvious defect, do not install. - Carefully remove all parts from the box.
- Install the harp (C) onto the saddle (D).
- Place the shade (B) onto the harp (C) and secure it with the
finial (A). - Insert a bulb (not included) into the socket.
- Remove the protective plug cover (E) from the plug.
- Plug the lamp into a proper electrical outlet and test the
fixture. - Once installation and testing are complete, the installation is
considered finished.
Note: Carefully unpack each piece in the top
layer of packing prior to removing. Retain all packing material
until inspection and installation are final.
Important: Clean the lamp with a dry, soft
cloth only. Do not use harsh abrasives or chemical agents.
CM
C
US
LIST ED
Intertek
DRY
Alta Table Lamp Item # KW 3024
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT. DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED. NOTE: CAREFULLY UNPACK EACH PIECE IN TOP LAYER OF PACKING PRIOR TO REMOVING. RETAIN ALL PACKING MATERIAL UNTIL INSPECTION AND INSTALLATION ARE FINAL.
1. Carefully remove all parts from the box.
2. Install harp (C) onto the saddle (D). 3. Place shade (B) to the harp (C) and secure with finial (A). 4. Insert bulb (not included) into the socket. 5. Remove protective plug cover (E) from the plug. 6. Plug into a proper electrical outlet and test the fixture. 7. Installation is complete.
***Clean with a dry, soft cloth only. Use no harsh abrasives or chemical agents.
