ARN 3611 Pierrepont Medium Table Lamp
Product Information
Product Name: Pierrepont Medium Table Lamp
Item Number: ARN 3611
Package Contents: A, B (packaged separately), C, D, E
Notice: This light fixture should be installed in accordance
with all applicable, local installation codes, and by a person
familiar with the construction and operation of it, as well as the
hazards involved. Inspect item and contents carefully. If any
damage or defect is found, do not install. Retain all packaging
material until installation is complete and approved.
Tools Required (Not Included): Scissors
Product Usage Instructions
- Carefully remove all parts from the box. Place on a clean, soft
surface. - Install harp (C) by squeezing together and inserting into top
of saddle (D). - Remove finial (A) from harp (C).
- Remove shade (B) from packaging and install to harp (C) using
finial (A). Note: If shade has additional packaging, carefully cut
it off from the interior of the shade to avoid damages. - Install the light bulb into the socket.
- Remove protective cover (E) from the plug.
- Plug the lamp into an electrical outlet and test the
fixture.
Care Instructions
Clean only with a soft dry cloth or feather duster. Do not use
abrasive or chemical agents.
M LI ST ED US
ASSEMBLY INSTRUCTIONS
A B (Packaged separately)
C Bulb not included D
E
Pierrepont Medium Table Lamp Item # ARN 3611
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Install harp (C) by squeezing together and inserting into top of
saddle (D). 3. Remove finial (A) from harp (C). 4. Remove shade (B) from packaging and install to harp (C) using
finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 5. Install light bulb into the socket. 6. Remove protective cover (E) from plug. 7. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
