ARN 3641 Capra Medium Table Lamp
Product Information:
The Capra Medium Table Lamp (Item # ARN 3641) is a light fixture
that requires assembly. It comes with separate components,
including a harp (C), a shade (B), a finial (A), and a protective
cover (E) for the plug. The lamp does not include a light bulb.
Please note that this light fixture should be installed in
accordance with all applicable, local installation codes, and by a
person familiar with its construction and operation, as well as the
hazards involved. Before installation, carefully inspect the item
and its contents. If any damage or defect is found, do not proceed
with the installation. Retain all packaging material until the
installation is complete and approved.
It is important to use the necessary tools for assembly, which
in this case are scissors.
Product Usage Instructions:
- Carefully remove all parts from the box and place them on a
clean, soft surface. - Install the harp (C) by squeezing it together and inserting it
into the top of the saddle (D). - Remove the finial (A) from the harp (C).
- Remove the shade (B) from its packaging and install it to the
harp (C) using the finial (A). If the shade has additional
packaging, carefully cut it off from the interior of the shade to
avoid damages. - Install a light bulb into the socket.
- Remove the protective cover (E) from the plug.
- Plug the lamp into an electrical outlet and test the
fixture.
Care Instructions:
To clean the lamp, use only a soft dry cloth or a feather
duster. Avoid using abrasive or chemical agents.
The Capra Medium Table Lamp is listed and approved for use in
the US.
ASSEMBLY INSTRUCTIONS
A B (Packaged separately)
C Bulb not included D
E
Capra Medium Table Lamp Item # ARN 3641
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Install harp (C) by squeezing together and inserting into top of
saddle (D). 3. Remove finial (A) from harp (C). 4. Remove shade (B) from packaging and install to harp (C) using
finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 5. Install light bulb into the socket. 6. Remove protective cover (E) from plug. 7. Plug into electrical outlet and test fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
