ARN 3620 Hunlen Table Lamp
Product Information
Product Name: Hunlen Table Lamp
Item Number: ARN 3620
Manufacturer: Not mentioned
Product Type: Table Lamp
Power Source: Electrical outlet
Compatibility: Bulb not included
Usage: Indoor use only
Care Instructions: Clean only with a soft dry cloth or feather
duster. Do not use abrasive or chemical agents.
Product Usage Instructions
- Tools Required (Not Included): Scissors
- Carefully remove all parts from the box. Place on a clean, soft
surface. - Remove socket ring (A) from socket (C).
- Remove shade (B) from packaging and install it to socket (C)
using socket ring (A). If the shade has additional packaging,
carefully cut it off from the interior of the shade to avoid
damages. - Install a light bulb into the socket.
- Remove the protective cover (D) from the plug.
- Plug the lamp into an electrical outlet.
- Test the fixture to ensure it is working properly.
Note: Before installation, make sure to inspect the item and its
contents carefully. If any damage or defect is found, do not
proceed with the installation. Retain all packaging material until
installation is complete and approved.
Warning: This light fixture should be installed in accordance
with all applicable, local installation codes, and by a person
familiar with its construction and operation, as well as the
hazards involved.
ASSEMBLY INSTRUCTIONS
A
B Bulb not included C
D
Hunlen Table Lamp Item # ARN 3620
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Remove socket ring (A) from socket (C). 3. Remove shade (B) from packaging and install to socket (C) using
socket ring (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 4. Install light bulb into the socket. 5. Remove protective cover (D) from plug. 6. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
