CS 3658 Hans Medium Table Lamp
Product Information
Product: Hans Medium Table Lamp
Item #: CS 3658
Bulb: Not included
Tools required (not included): Scissors
Care Instructions: Clean only with a soft dry cloth or feather
duster. Do not use abrasive or chemical agents.
Product Usage Instructions
- Carefully remove all parts from the box. Place on a clean, soft
surface. - Install harp (C) by squeezing together and inserting into top
of saddle (D). - Remove finial (A) from harp (C).
- Remove shade (B) from packaging and install to harp (C) using
finial (A). Note: If shade has additional packaging, carefully cut
off from interior of shade to avoid damages. - Install light bulb into the socket.
- Remove protective cover (E) from plug.
- Plug into electrical outlet and test fixture.
ASSEMBLY INSTRUCTIONS
A B (Packaged separately)
C Bulb not included D E
Hans Medium Table Lamp Item # CS 3658
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Install harp (C) by squeezing together and inserting into top of
saddle (D). 3. Remove finial (A) from harp (C). 4. Remove shade (B) from packaging and install to harp (C) using
finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 5. Install light bulb into the socket. 6. Remove protective cover (E) from plug. 7. Plug into electrical outlet and test fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
