KW3022 Alessio Large Table Lamp
Product Information:
Product Name: Alessio Large Table Lamp
Item Number: KW3022
Package Contents: Lamp base, socket ring,
shade, diffuser, protective plug cover
Tools Required (Not Included): Scissors
Important Notice: This light fixture should be
installed in accordance with all applicable, local installation
codes, and by a person familiar with the construction and operation
of it, as well as the hazards involved. Inspect the item and
contents carefully. If any damage or defect is found, do not
install. Retain all packaging material until installation is
complete and approved.
Product Usage Instructions:
- Carefully remove all parts from the box. Place them on a clean,
soft surface. - Remove the socket ring (B) from the socket (D).
- Remove the shade (C) from the packaging and install it onto the
socket (D) by securing it with the socket ring (B). Note: If the
shade has additional packaging, carefully cut it off from the
interior of the shade to avoid damages. - Install the light bulb into the socket.
- Place the diffuser (A) on top of the shade (C).
- Remove the protective plug cover (E) from the plug.
- Plug the lamp into an electrical outlet.
- Test the fixture to ensure it is functioning properly.
Care Instructions:
Clean the lamp only with a soft dry cloth or feather duster. Do
not use abrasive or chemical agents.
Note: This product is listed for use in the
United States.
ASSEMBLY INSTRUCTIONS
A Bulb not included B
C (Packaged separately) D
E
Alessio Large Table Lamp
Item # KW3022
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Remove socket ring (B) from socket (D). 3. Remove shade (C) from packaging and install to socket (D) by
securing with socket ring (B). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 4. Install light bulb into socket. 5. Place diffuser (A) on the top of shade (C). 6. Remove protective plug cover (E) from the plug. 7. Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
M
LI ST ED
US
